Connecting the Speakers |
| Connecting to External | |
Before moving or installing the product, be sure to turn off the power and disconnect the power cord. |
| Components | |
|
| ||
Right Speaker | Left Speaker |
| Connecting to an External Analog Component |
| |||
|
| ||
|
| ||
Example: Analog signal components such as a VCR, Camcorder, and TV.
CONNECTIONS
Position of the DVD Player
•Place it on a stand or cabinet shelf, or under the TV stand.
Loudspeakers L R
•Place these speakers in front of your listening position, facing inwards (about 45°) toward you.
•Place the speakers so that their tweeters will be at the same height as your ear.
Selecting the Listening Position
The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV. Example: For 32" TVs 2~2.4m (6~8feet)
For 55" TVs 3.5~4m (11~13feet)
RADIO ANTENNA
R 
L
Audio Cable
If the external analog
component has only one Audio Out, connect either left or right.
Directions in Installing Speaker
•Installation in a place near heating apparatus, under direct lay of light or with high humidity may cause performance degradation of the speaker.
•Do not install on the wall or on a high place of pole or other unstable place to prevent any safety accident caused by falling of the speaker.
•Do not take the speaker apart from TV or computer monitor.
The speaker near the TV or computer monitor may influence the quality of the screen display.
1Connect Audio In on the DVD player to Audio Out on the external analog component.
• Be sure to match connector colors.
2Press AUX to select AUX.
• ‘AUX’ appears in the display.
9 | 10 |