Installation, Rightwrong | Heath Zenith BL-5511 specification

INSTALLATION

For easy installation, select an existing light with a wall switch for replacement.

For best performance, locate the fixture about 8 ft. (2.4 m) above the ground.

CAUTION: The sensor must be mounted below the lamp housing for wall installations.

❒ Drill out the holes if needed to mount the backplate to the junction box.

CAUTION to avoid fire or burn hazards:

•Allow fixture to cool before touching. The bulb and fixture operate at high temperatures.

•Keep fixture at least 2" (5 cm) from combustible materials. Do not aim at objects closer than 3 feet (1 m).

•Re-lamp with type T 150W (or less) halogen 120 VAC lamp only.

For under eave installation, the sensor head must be rotated as shown in the next two steps for proper operation and to avoid the risk of electrical shock.

❒Rotate the sensor head to-

wards the clamp screw joint.			Controls

Clamp Screw

❒Then rotate the sensor

head counterclockwise 180° so the controls face down.

Controls

If the sensor pops out of the ball joint, loosen the clamp screw and push the sensor back into the ball joint. Tighten the clamp screw when done.

Bulb Installation and Relamping

❒When relamping, turn power off and let the fixture cool.

❒Remove the screw that holds the glass cover shut. Remove the old bulb by pushing the bulb towards the right until the left side of the bulb is clear of the left socket.

❒To insert the new bulb, push the bulb into the right socket so the bulb fits completely into the left socket.

❒Check that the bulb is seated properly.

❒Close the glass cover. Replace screw.

Wire the Light Control

WARNING:Turn power off at the fuse or circuit breaker.

❒Remove the existing light fixture.

❒Strip about 5/8" insulation from the existing junction box wiring.

❒Route the light control’s wires through the large hole in the gasket.

❒Twist the junction box wires and fixture wires together as shown. Secure with wire connectors.

		White to White
Black to Black		White to White

Junction box ground wire to green ground wire on fixture. Cover Plate

Gasket

Mount the Light Control

❒Align the light control cover plate and cover plate gasket and the junction box. Insert and tighten the mounting screws.

❒If not installed on a weatherproof box or if an adaptor plate is used, caulk the wall plate and mounting surface with silicone weather sealant.

RIGHTWRONG

The halogen light must be mounted horizontally (+/- 4°).

598-1324-01

BL-5511 specifications

The Heath Zenith BL-5511 is a highly regarded outdoor motion-sensing light fixture designed to enhance security and provide illumination for residential properties. This robust lighting solution combines functionality with aesthetics, making it a popular choice among homeowners.

One of the main features of the BL-5511 is its advanced motion detection capability. Equipped with a passive infrared (PIR) sensor, the fixture can detect movement within a programmable range, typically up to 100 feet. This feature ensures that lights activate only when necessary, conserving energy and extending bulb life. Users can adjust the sensitivity of the sensor, allowing for customization based on the specific needs of the property, such as the level of activity in the vicinity.

The BL-5511 is designed to emit a bright, white LED light, which provides clear visibility during nighttime hours. LEDs are more energy-efficient compared to traditional incandescent bulbs, resulting in lower energy bills and a reduced environmental footprint. The fixture typically offers a lumens output of around 1800, sufficient to illuminate large areas effectively.

Another notable characteristic of the Heath Zenith BL-5511 is its durable construction. Built to withstand various weather conditions, the fixture features a weather-resistant design with a sturdy housing that protects it from moisture and dust. This ensures reliable performance over time, making it an ideal option for outdoor settings.

Installation of the BL-5511 is user-friendly, with clear instructions and all necessary mounting hardware included. The fixture can be easily installed on walls, posts, or other surfaces, allowing for versatile placement where lighting is needed most.

The design of the BL-5511 is aesthetically pleasing, blending seamlessly with a variety of architectural styles. Available in different finishes, it can complement any outdoor decor, enhancing the overall curb appeal of a home.

In terms of safety, the Heath Zenith BL-5511 contributes significantly by illuminating pathways, driveways, and entrances, deterring potential intruders. The motion activation feature ensures that the light is only active when needed, making it a smart choice for energy-conscious homeowners.

In summary, the Heath Zenith BL-5511 is a powerful, energy-efficient outdoor lighting solution that combines reliable motion detection with beautiful design. With its advanced technology, durable construction, and user-friendly installation, it stands out as an excellent choice for enhancing outdoor security and convenience.