Heath Zenith BL-5511 manual Test and Adjustment, Specifications, Avoid aiming the control at

Page 3

TEST AND ADJUSTMENT

Turn on the circuit breaker and light switch.

NOTE: Sensor requires about 1 1/2 minutes to calibrate before it will detect motion. When first turned on, wait about 1 1/2 minutes.

Set the ON-TIME control to the TEST position.

ON-TIME

10 TEST

Bottom of Sensor

Avoid aiming the control at:

Loosen the clamp screw in the sensor ball joint and gently rotate the sensor to aim.

Walk through the coverage area noting where you are when the lights turn on. Move the sensor head up, down, or sideways to change the cover- age area.Keep the sensor at least 1" (25 mm) away from the lamps.

Secure the sensor head into position by tightening the clamp screw. Do not over- tighten the screw.

Set the ON-TIME control to 10 minutes.

Clamp

Ball

Joint

Aim Sensor

Down for Short

Coverage

Aim Sensor

Higher for Long

Coverage

Objects that change temperature rapidly, such as heating vents and air conditioners. These heat sources could cause false triggering.

Areas where pets or traffic may trigger the control.

Nearby large, light-colored objects reflecting light may trigger the shut-off feature. Do not point other lights at the sensor.

110°

8ft.

(2.4 m)

 

50 ft.

 

Maximum

(15.2 m)

Maximum

 

Range

 

Coverage Angle

The control is most sensitive to motion across it.

MotionMotion

 

Sensor

Least Sensitive

Most Sensitive

SPECIFICATIONS

Range

Up to 50 ft.(15.2 m);[varies with

 

surrounding temperature]

Sensing Angle. . . .

Up to 110°

Electrical Load. . . .

Up to 150 Watts Maximum

 

tungsten

Power Requirements. . 120 VAC, 60 Hz

Operating Modes. . .

TEST, AUTO and MANUAL

 

MODE

Time Delay

10 minutes

Sensitivity . . . . . . Adjustable

Replacement lamp. . . T 150W (or less) halogen 120

VAC

HeathCo LLC reserves the right to discontinue prod- ucts and to change specifications at any time without incurring any obligation to incorporate new features in products previously sold.

598-1324-01

Image 3
Contents Requirements Mode Switching SummaryOperation Model BL-5511Rightwrong InstallationAvoid aiming the control at Test and AdjustmentSpecifications Turn on the circuit breaker and light switchTroubleshooting Guide No Service Parts Available for this ProductSymptom Possible Cause Resumen de las modalidades del interruptor FuncionamientoModelo BL-5511 RequisitosCorrectoincorrecto InstalacionEspecificaciones Prueba Y AjusteGarantía Limitada a 2 Años Guia DE Investigacion DE AveriasServicio Técnico No hay piezas de servicio disponibles para este productoExigences Résumé du mode de commutationFonctionnement Modèle BL-5511Correctincorrect Monter Horizontalement Montage De La Commande D’éclairageNoir / noir Blanc / blanc Au fil de terre vert du luminaireEssais ET Réglages Fiche TechniqueBas du détecteur Symptôme Cause Possible Service TechniqueGuide DE Dépannage Aucune pièce de rechange n’est disponible pour ce produit

BL-5511 specifications

The Heath Zenith BL-5511 is a highly regarded outdoor motion-sensing light fixture designed to enhance security and provide illumination for residential properties. This robust lighting solution combines functionality with aesthetics, making it a popular choice among homeowners.

One of the main features of the BL-5511 is its advanced motion detection capability. Equipped with a passive infrared (PIR) sensor, the fixture can detect movement within a programmable range, typically up to 100 feet. This feature ensures that lights activate only when necessary, conserving energy and extending bulb life. Users can adjust the sensitivity of the sensor, allowing for customization based on the specific needs of the property, such as the level of activity in the vicinity.

The BL-5511 is designed to emit a bright, white LED light, which provides clear visibility during nighttime hours. LEDs are more energy-efficient compared to traditional incandescent bulbs, resulting in lower energy bills and a reduced environmental footprint. The fixture typically offers a lumens output of around 1800, sufficient to illuminate large areas effectively.

Another notable characteristic of the Heath Zenith BL-5511 is its durable construction. Built to withstand various weather conditions, the fixture features a weather-resistant design with a sturdy housing that protects it from moisture and dust. This ensures reliable performance over time, making it an ideal option for outdoor settings.

Installation of the BL-5511 is user-friendly, with clear instructions and all necessary mounting hardware included. The fixture can be easily installed on walls, posts, or other surfaces, allowing for versatile placement where lighting is needed most.

The design of the BL-5511 is aesthetically pleasing, blending seamlessly with a variety of architectural styles. Available in different finishes, it can complement any outdoor decor, enhancing the overall curb appeal of a home.

In terms of safety, the Heath Zenith BL-5511 contributes significantly by illuminating pathways, driveways, and entrances, deterring potential intruders. The motion activation feature ensures that the light is only active when needed, making it a smart choice for energy-conscious homeowners.

In summary, the Heath Zenith BL-5511 is a powerful, energy-efficient outdoor lighting solution that combines reliable motion detection with beautiful design. With its advanced technology, durable construction, and user-friendly installation, it stands out as an excellent choice for enhancing outdoor security and convenience.