Heath Zenith BL-2400 manual Troubleshooting Guide, No Service Parts Available for this Product

Page 4

TROUBLESHOOTING GUIDE

SYMPTOM

 

POSSIBLE CAUSE

 

 

 

 

 

Lights will not come

1. Light switch is turned off.

on.

 

 

2. Flood light

is

loose or

 

 

 

 

burned out.

 

 

 

 

 

3.

Fuse is blown or circuit breaker

 

 

 

 

is turned off.

 

 

 

 

 

4.

Daylight turn-off is in effect (re-

 

 

 

 

check after dark).

 

 

 

 

5.

Incorrect circuit wiring, if this is a

 

 

 

 

new installation.

 

 

 

 

6.

Re-aim the sensor to cover de-

 

 

 

 

sired area.

 

 

Lights

come

on

1. Light control may be installed in

in daylight.

 

 

a relatively dark location.

 

 

 

2.

Light control is in Test .

 

 

 

 

(Set control switch to an

 

 

 

 

ON-TIME position).

 

Lights

come

on

1. Light control

may

be sensing

for no

apparent

 

small animals or automobile traf-

reason.

 

 

 

fic (re-aim sensor).

 

 

 

 

2.

Sensitivity is set too high.(Reduce

 

 

 

 

sensitivity.)

 

 

 

 

 

 

 

 

 

SYMPTOM

POSSIBLE CAUSE

 

 

 

 

Lights stay on

1. A flood lamp is positioned too close to

continuously.

the sensor or pointed at nearby objects

 

that cause heat to trigger the sensor.

 

(Reposition the lamp away from the

 

sensor or nearby objects).

 

2. Light control is pointed toward a heat

 

source like an air vent, dryer vent, or

 

brightly-painted heat-reflective sur-

 

face. (Reposition sensor).

 

3. Light control is in Manual Mode.(Switch

 

to Auto.)

Lights flash on

1. Heat or light from the lamps may be

and off.

turning the light control on and off.

 

(Reposition the lamps away from the

 

sensor).

 

2. Heat being reflected from other objects

 

may be affecting the sensor. (Reposi-

 

tion sensor).

 

3. Light control is in the Test mode and

 

warming up.(Flashing is normal under

 

these conditions).

 

4. Light may be leaking through the flood-

 

lampreflectors.(Replace the lamps with

 

new high quality PAR 38 lamps).

 

 

Technical Service

Please call 1-800-858-8501 (English speaking only) for assistance before returning

product to store.

If you experience a problem, follow this guide.You may also want to visit our Web site at: www.hzsupport.com. If the problem persists, call* for assistance at 1-800-858-8501(English speaking only), 7:30 AM to 4:30 PM CST (M-F). You may also write* to:

HeathCo LLC, P.O. Box 90004, Bowling Green, KY 42102-9004 ATTN: Technical Service

*If contacting Technical Service, please have the following information available: Model Number, Date of Pur- chase, and Place of Purchase.

No Service Parts Available for this Product

TWO YEAR LIMITED WARRANTY

This is a “Limited Warranty” which gives you specific legal rights. You may also have other rights which vary from state to state or province to province.

For a period of two years from the date of purchase, any malfunction caused by factory defective parts or workmanship will be corrected at no charge to you.

Not Covered - Repair service, adjustment and calibration due to misuse, abuse or negligence, light bulbs, batteries, and other expendable items are not covered by this warranty. Unauthorized service or modification of the product or of any furnished component will void this warranty in its entirety. This warranty does not include reimbursement for incon- venience, installation, setup time, loss of use, unauthorized service, or return shipping charges.

This warranty covers only HeathCo LLC assembled products and is not extended to other equipment and components that a customer uses in conjunction with our products.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY, REPRESENTATION OR CONDITION OF MERCHANT ABILITY OR THAT THE PRODUCTS ARE FIT FOR ANY PARTICULAR PURPOSE OR USE, AND SPECIFICALLY IN LIEU OF ALL SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.

REPAIR OR REPLACEMENT SHALL BE THE SOLE REMEDY OF THE CUSTOMER AND THERE SHALL BE NO LIABILITY ON THE PART OF HEATHCO LLC FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO ANY LOSS OF BUSINESS OR PROFITS, WHETHER OR NOT FORESEEABLE. Some states or provinces do not allow the exclusion or limitation of incidental or consequential dam- ages, so the above limitation or exclusion may not apply to you. Please keep your dated sales receipt, it is required for all warranty requests.

598-1322-01

Image 4
Contents Features Mode Switching SummaryOperation Model BL-2400Installation Wire the Light ControlEave Mount Wall Mount Black to White to Black WhiteGasketSpecifications Test and AdjustmentTurn on the circuit breaker and light switch No Service Parts Available for this Product Troubleshooting GuideSymptom Possible Cause Funcionamiento Modelo BL-2400Características RequisitosMontaje en pared Montaje en alero InstalacionBlanco a Negro a Prueba Y Ajuste EspecificacionesPrenda el cortacircuitos y el interruptor de luz Parte de abajo del detector Evite apuntar el control haciaGuia DE Investigacion DE Averias Servicio TécnicoNo hay piezas de servicio disponibles para este producto Garantía Limitada a 2 AñosRésumé du mode de commutation FonctionnementModèle BL-2400 CaractéristiquesMontage sous Montage mural Avant-toit BlancGarniture Blanc Noir De jointEssais ET Réglages Fiche TechniqueBas du détecteur Éviter de pointer l’appareilService Technique Guide DE DépannageAucune pièce de rechange n’est disponible pour ce produit Symptôme Cause Possible

BL-2400 specifications

The Heath Zenith BL-2400 is a sophisticated and robust wireless outdoor motion sensor light designed to enhance both security and convenience around your home. With its reliable features and advanced technology, it is ideal for homeowners seeking an effective solution to illuminate various exterior areas while deterring potential intruders.

At the heart of the BL-2400 is its advanced motion detection technology. The sensor has a broad detection range of up to 2400 square feet, making it suitable for a variety of outdoor spaces, including driveways, yards, patios, and entryways. With a detection angle of 180 degrees, it ensures comprehensive coverage, alerting you to any movement in the vicinity.

One of the standout features of the Heath Zenith BL-2400 is its adjustable sensitivity settings. Users can customize the sensor's sensitivity level to reduce false alarms caused by animals or passing cars. This flexibility allows homeowners to tailor the lighting system to meet their unique environment and needs, ensuring optimal performance in any situation.

The BL-2400 also includes an integrated dusk-to-dawn sensor. This feature automatically turns the light on at dusk and off at dawn, providing convenience and energy efficiency. This means you don’t have to worry about manually switching the light on or off each evening, allowing for a hassle-free experience while ensuring your property remains illuminated when needed.

In terms of design, the Heath Zenith BL-2400 boasts a weather-resistant housing that protects it from harsh outdoor conditions. This durability ensures that the unit can withstand various environmental elements, including rain, wind, and extreme temperatures, making it a long-lasting addition to your home's exterior.

Installation of the BL-2400 is straightforward, requiring minimal tools and expertise. The unit is designed to be user-friendly, allowing homeowners to set it up quickly and effortlessly.

Additionally, the Heath Zenith BL-2400 utilizes energy-efficient LED bulbs, providing bright illumination while consuming less energy than traditional incandescent bulbs. This not only helps reduce electricity costs but also extends the lifespan of the light unit.

In conclusion, the Heath Zenith BL-2400 combines advanced motion detection technology, adjustable settings, and energy efficiency in a durable outdoor light fixture. This makes it an excellent choice for homeowners looking to enhance outdoor security while enjoying the benefits of automatic and reliable lighting solutions.