Heath Zenith P6036 manual Test and Adjustment, Specifications, Avoid aiming the control at

Page 3
Clamp
Screw
Ball Joint
Aim Sensor
Down for Short
Coverage
Aim Sensor
Higher for Long
Coverage

TEST AND ADJUSTMENT

Turn on the circuit breaker and light switch.

NOTE: Sensor has a 1 1/2 minute calibration period before it will detect motion. When first turned on, wait 1 1/2 minutes.

Turn the RANGE control to the mid position and the ON-TIME control to the TEST position.

Loosen the clamp screw in the sensor ball joint and gently rotate the sensor.

Walk through the cover- age area noting where you are when the lights turn on (also, the LED will flash several times when motion is detected). Move the sensor head up, down,

ON-TIME

10 5 1 TEST

RANGE

MIN MAX

or sideways to change the coverage area. Keep the sensoratleast1"(2.5cm) away from the lamps.

Adjust the RANGE as needed. RANGE set too

Bottom of Sensor

Avoid aiming the control at:

Objects that change temperature rapidly, such as heating vents and air conditioners. These heat sources could cause false triggering.

Areas where pets or traffic may trigger the control.

Nearby large, light-colored objects reflecting light may trigger the shut-off feature. Do not point other lights at the sensor.

8 ft.

180°

(2.4m)

 

70 ft.

 

(21m)

 

Maximum Range

Maximum

 

Coverage Angle

Thesensorislesssensitivetomotiondirectlytowards it, most sensitive to motion across its field of view.

MotionMotion

 

Sensor

Least Sensitive

Most Sensitive

high may increase false triggering.

Secure the sensor head by tightening the clamp

screw. Do not overtighten the screw.

Set the amount of TIME you want the lights to stay on after motion is detected (1, 5, or 10 minutes).

Warning - Risk of fire. Do not aim the lamps at a combustible surface within 3 ft. (1 m).

SPECIFICATIONS

Range . . . . . . . . Up to 70 ft. (21 m) [varies with surrounding temperature].

Sensing Angle. . . . . Up to 180°

Electrical Load. . . . . Upto500Watt(4.2A)Maximum Incandescent [Up to 250 Watt maximum each lamp holder.]

Power Requirements. . 120 VAC, 60 Hz

Operating Modes. . . . TEST, AUTO, and MANUAL MODE

Time Delay . . . . . . 1, 5, 10 minutes Range . . . . . . . . Adjustable

598-1280-00

--

Image 3
Contents Operation Some codes require installation by a qualified electricianInstallation Avoid aiming the control at Test and AdjustmentSpecifications Turn on the circuit breaker and light switchSymptom Possible Cause Troubleshooting Guide

P6036 specifications

The Heath Zenith P6036 is a cutting-edge motion-activated outdoor lighting solution designed to enhance security and provide convenience in residential and commercial spaces. This modern fixture combines innovative technology with practicality, making it a preferred choice for many homeowners and businesses.

One of the standout features of the P6036 is its advanced motion sensor technology. The fixture is equipped with a highly sensitive passive infrared (PIR) sensor that can detect motion up to 30 feet away. This feature ensures that the light activates when someone approaches, providing illumination for safe passage and deterring potential intruders. The detection range can also be adjusted, allowing users to tailor the sensitivity based on their specific needs and the installation environment.

Another key characteristic of the P6036 is its adjustable time setting. Users can customize how long the light remains on after activation, with options ranging from 1 to 10 minutes. This flexibility means you can set the light to an appropriate duration, ensuring energy efficiency while still providing comfort and safety.

The P6036 boasts a sturdy construction, often made from durable materials that can withstand various weather conditions, including rain, snow, and intense sunlight. This resilience ensures that the lighting fixture will operate reliably over time without the need for frequent replacements.

In terms of aesthetic appeal, the Heath Zenith P6036 is available in various styles and finishes, allowing it to blend seamlessly with different architectural designs. Whether you're outfitting a contemporary home or a classic building, there is a design option to suit your preferences.

Energy efficiency is another important feature of the P6036. Many models come equipped with LED bulbs, which consume significantly less power than traditional incandescent bulbs. This not only reduces electricity bills but also contributes to environmental conservation efforts by lowering carbon footprints.

Installation is straightforward, making it accessible to both DIY enthusiasts and professionals. Many users appreciate the ease with which they can mount the fixture in their desired location, ensuring that they can enjoy the benefits of enhanced security as quickly as possible.

In summary, the Heath Zenith P6036 is a versatile and reliable choice for outdoor lighting. With its motion sensor technology, adjustable settings, durable construction, aesthetic variety, energy efficiency, and easy installation, it meets the needs of those looking to enhance safety and functionality in their outdoor areas. Whether for home security or illuminating pathways, the P6036 is designed to deliver optimal performance while offering peace of mind.