Sony UWP-V1 manual Specifications, F3E

Specifications

UTX-B2V/B2X Bodypack Transmitter

UTX-H2 Handheld Microphone

UTX-P1 Plug-on Transmitter

Oscillator		Crystal-controlled PLL Synthesizer		—
Type of emission		F3E
Carrier	U3032	566 MHz to 590 MHz, selectable from 188 frequencies (in 125-kHz steps)
frequencies	U4244	638 MHz to 662 MHz, selectable from 188 frequencies (in 125-kHz steps)
	CE62	798 MHz to 822 MHz, selectable from 189 frequencies (in 125-kHz steps) / 960 frequencies (in 25-kHz steps)
	CE67	838 MHz to 862 MHz, selectable from 190 frequencies (in 125-kHz steps) / 960 frequencies (in 25-kHz steps)
	AU66	792 MHz to 806 MHz, selectable from 102 frequencies (in 125-kHz steps)		—
	CN	758 MHz to 782 MHz, selectable from 188 frequencies (in 125-kHz steps)		—
	E	794 MHz to 806 MHz, selectable from 94 frequencies (in 125-kHz steps)		—
RF power output		30mW/5mW selectable (except E model)		50 mW
		10mW/2mW selectable (E model)
Antenna		1/4 wave length wire	1/4 wave length wire (internal)	Integral type
Pilot tone signal		32 kHz
Frequency response		40 Hz to 18 kHz (typical)	50 Hz to 18 kHz (typical)
Reference deviation		±7 kHz (-60 dBV, 1-kHz input)	±7 kHz (94 dB SPL, 1-kHz input)	±10 kHz (-60 dBV, 1-kHz input)
Signal-to-noise ratio		60 dB or more (±7-kHz deviation at 1-kHz modulation, A-weighted)		60 dB or more (±10-kHz deviation at 1-kHz modulation,
				A-weighted)
Microphone capsule		Electret condenser, omni-directional (UTX-B2V)	Dynamic, uni-directional	—
		Electret condenser, uni-directional (UTX-B2X)
Audio attenuator adjustment range		0 dB to 21 dB (in 3-dB steps): Mic input	0 dB to 21 dB (in 3-dB steps)	0 dB to 21 dB (in 3-dB steps): Mic input
Audio input level		MIC: -60 dBV (at 0-dB attenuator level)	—	MIC: -60 dBV (at 0-dB attenuator level)
		LINE: +4 dBu		LINE: +4 dBu
Audio input connector		3-pole mini jack	—	XLR-3-11C type
Max. input sound pressure level		—	151-dB SPL (at 21-dB attenuator level)	—
Indicators	LCD	Operating channel number/frequency, attenuator level, RF output level (High/Low), audio input status,		Operating channel number/frequency, attenuator
		transmitter battery status, and accumulated operating time		level, audio input status, RF output status, transmitter
				battery status, and accumulated operating time
	LED	Audio input status	Power status	Audio input status
Power requirements		DC 3.0 V (with two AA-size alkaline (LR6) batteries)
Battery life		Approx. eight hours with Sony's AA-size alkaline (LR6) batteries at 77°F (25°C) at 30-mW output (except E model)		Approx. six hours with Sony’s AA-size alkaline (LR6)
		Approx. ten hours with Sony's AA-size alkaline (LR6) batteries at 77°F (25°C) at 10-mW output (E model)		batteries at 77°F (25°C) at 50-mW output
Dimensions (W x H x D)		2 1/2 × 3 1/4 × 3/4 inches (63 × 82.5 × 18.7 mm)	o1 15/16 × 10 inches ( 49 x 253 mm)	1 3/4 x 4 x 1 7/16 inches (44 x 99 x 36 mm)
		excluding the antennas
Weight		Approx. 5.1 oz (145 g), including batteries	Approx. 11 oz (308 g), including batteries	Approx. 6.5 oz (185 g), including batteries

URX-P2 Portable Receiver

URX-M2 Tuner Module

Oscillator		Crystal-controlled PLL Synthesizer
Type of reception		Space diversity
Receiving	U3032	566	MHz to 590 MHz, selectable from 188 frequencies (in 125-kHz steps)
frequencies
	U4244	638	MHz to 662 MHz, selectable from 188 frequencies (in 125-kHz steps)
	CE62	798	MHz to 822 MHz, selectable from 189 frequencies (in 125-kHz steps) / 960 frequencies (in 25-kHz steps)
	CE67	838	MHz to 862 MHz, selectable from 189 frequencies (in 125-kHz steps) / 960 frequencies (in 25-kHz steps)
	AU66	792	MHz to 806 MHz, selectable from 102 frequencies (in 125-kHz steps)
	CN	758	MHz to 782 MHz, selectable from 188 frequencies (in 125-kHz steps)
	E	794	MHz to 806 MHz, selectable from 94 frequencies (in 125-kHz steps)
Antenna		1/4	wave length wire
Pilot tone signal		32 kHz
RF squelch level		15 dBμ		25 dBμ
Frequency response		40 Hz to 18 kHz (typical)
Reference deviation		±5 kHz (at 1-kHz modulation)
Signal-to-noise ratio		60 dB or more (±5-kHz deviation at 1-kHz modulation, A-weighted)
Audio output connector		3-pole mini jack, unbalanced-
Audio output level		-58 dBm		—
Monitor output connector		5/32 inch (3.5 mm) dia., stereo mini jack		—
Monitor output level		5 mW (at 16 Ω)		—
Indicators	LCD	Operating channel number/frequency, audio output status, RF input level, tuner battery status, and		Operating channel number/frequency, audio output
		accumulated operating time		status, RF input level
	LED	RF input status
Power requirements		DC 3.0 V (with two AA-size alkaline (LR6) batteries)		DC 9.0 V
Battery life		Approx. six hours with Sony’s AA-size alkaline (LR6) batteries at 77°F (25°C)		—
Dimensions (W x H x D)		2 1/2 x 4 1/8 x 7/8 inches (63 x 104.5 x 22 mm), excluding the antennas		2 1/4 x 1 1/16 x 4 7/8 inches (57 x 26 x 121 mm)
Weight		Approx. 7.2 oz (205 g), including batteries		Approx. 5.3 oz (150 g)

Use of wireless devices from Sony in the United States of America is regulated by the Federal

Communications Commission as described in Parts 15 and 74 of the FCC regulations.

Authorized users are thereby required to obtain an appropriate license

Sony Electronics Inc.

1 Sony Drive

Park Ridge, NJ 07656

click: sony.com/proaudio

A-1171-A (MK10474V2)

©2009 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without written permissions is prohibited. Features, design, and specifications are subject to change without notice.

All non-metric weights and measurements are approximate. Sony and XDCAM EX are trademarks of Sony.

HDV and HDV logo are trademarks of Sony Corporation and Victor Company of Japan, Limited (JVC).

Printed in USA (3/09)