Heath Zenith SL-5512 manual White to White, Black to Black

Page 3

Bulb Installation

NOTE: Lamps are included, but you will need to install them

NOTE: When re-lamping, turn power off and let the fixture cool.

❒Open glass covers. To remove the old bulb push the bulb towards the right until the left side of the bulb is clear of the left socket.

❒To install a bulb, push the bulb into the right socket so the bulb fits completely into the left socket.

❒Check that the bulb is seated properly.

❒Close the glass covers.

Wire the Light Control

WARNING: Turn power off at circuit breaker or fuse.

❒Remove the existing light fixture.

❒Install mounting strap to junction box using screws appropriate for your junction box.

❒The plastic hanger can be used to hold the fixture while wiring. The small end of the plastic hanger can be threaded through the hole in the center of the cover plate. The small end then goes into one of the slots on the mounting strap.

❒Thread all fixture wires through the large holes in the gasket as shown.

❒Connect the junction box wires to the light fixture wires as shown. Twist together and secure with wire connectors.

CAUTION: Do not cut any wires with factory installed wire connectors.

White to White

Mounting Strap

Mount the Light Control

❒Place the mounting bolt through the front of the junction box cover. Push the small gasket hole over the mounting bolt.

❒Make sure the wire connectors and wires are inside the junction box. Align the mounting bolt with the center hole in the mounting strap.Secure the fixture to the mounting strap.

❒Push the rubber plug firmly into place.

Mounting Bolt

Rubber Plug

❒If not installed on a weatherproof box, caulk the wall plate and mounting surface with silicone.

❒Adjust the lamp holders by loosening the lock nuts but do not rotate the lamp holders more than 180° from the factory setting.

Push the rubber plug over the mounting bolt.

Gasket

Black to Black

Keep lamps at least 1" (2.5 cm) from the sensor.

Connect green or bare copper wire(s) in the fixture to green ground screw and ground wire in junc- tion box. Note: All ground wires shown as green in above illustration.

595-5575-09

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Features OperationRequirements Installation Mode Switching SummaryDualBrite Timer Black to Black White to WhiteSecure the sensor head by tightening the clamp screw Test and AdjustmentTurn on the circuit breaker and light switch Avoid aiming the control atTroubleshooting Guide SpecificationsNo Service Parts Available for this Product Technical ServiceFuncionamiento RequisitosCaracterísticas Instalacion Resumen de las modalidades del interruptorLuz de Adorno DualBrite Advertencia Desconecte la energía en el disyuntor Blanco a blancoNegro a negro Prueba Y Ajuste Prenda el cortacircuitos y el interruptor de luzEvite apuntar el control hacia Guia DE Investigacion DE Averias EspecificacionesNo hay piezas de servicio disponibles para este producto Servicio TécnicoFonctionnement CaractéristiquesExigences Minuterie DualBriteMD Résumé du mode de commutationGarniture de joint Blanc / blancÉviter de pointer l’appareil Essais ET RéglagesGuide DE Dépannage Fiche TechniqueAucune pièce de rechange n’est disponible pour ce produit Service Technique595-5575-09 Nº de modelo / N de modèle

SL-5512 specifications

The Heath Zenith SL-5512 is a versatile and innovative outdoor spotlight that combines robust design with cutting-edge technology. Designed for homeowners looking to enhance the security and ambiance of their outdoor spaces, this spotlight is highly versatile and easy to use.

One of the standout features of the SL-5512 is its impressive motion sensor capability. The infrared sensor can detect movement from a considerable distance, triggering the light to illuminate when someone approaches. This feature is crucial for both security and convenience, ensuring that pathways, driveways, and entrances are well-lit when needed most. The adjustable sensitivity settings allow users to customize the detection range, ensuring that the light activates only when necessary, reducing the chance of false alarms.

In terms of illumination, the SL-5512 employs energy-efficient LED technology. This not only provides bright and vibrant light but also contributes to lower energy consumption compared to traditional incandescent bulbs. The LED light has a longer lifespan, which means less frequent replacements, making it a cost-effective choice for homeowners. Additionally, the light output is designed to cast a wide beam, effectively illuminating a larger area to enhance visibility.

The design of the SL-5512 is both functional and aesthetically pleasing. It typically features a durable, weather-resistant housing that can withstand various outdoor conditions, including rain, wind, and extreme temperatures. This resilience ensures that the spotlight remains operational in all seasons, providing reliable security and lighting for years to come.

Another important characteristic of the SL-5512 is its ease of installation. Most users will find that they can set it up quickly with minimal tools, allowing them to enjoy improved outdoor lighting without the need for a professional electrician. The adjustable mount and swivel mechanism enable users to direct the light exactly where it is needed.

In summary, the Heath Zenith SL-5512 stands out due to its advanced motion sensing capabilities, energy-efficient LED illumination, and durable design. It is an excellent choice for enhancing outdoor safety and ambiance, delivering both practicality and style to any home environment. With its blend of features, technologies, and characteristics, this spotlight is well-suited for various residential applications, ensuring peace of mind and enhanced outdoor living experiences.
Top Page Image Contents