Troubleshooting Guide

SYMPTOM		POSSIBLE CAUSE


Lights will not come		1. Light switch is turned off.
on.		2. Flood light is loose or burned
			out.
		3.	Fuse is blown or circuit breaker
			is turned off.
		4.	Daylight turn-off is in effect (re-
			check after dark).
		5.	Incorrect circuit wiring, if this is a
			new installation.
		6.	Re-aim the sensor to cover de-
			sired area.
Lights come on in		1. Light control may be installed in
daylight.			a relatively dark location.
		2.	Light control is in Test. (Set
			control switch to an ON-TIME
			position).
Lights	come on	1. Light control may be sensing
for no	apparent		small animals or automobile traf-
reason.			fic (re-aim sensor).
		2.	Range is set too high. (Reduce
			Range).

SYMPTOM	POSSIBLE CAUSE


Lights stay on	1. A flood lamp is positioned too close to
continuously.	the sensor or pointed at nearby objects
	that cause heat to trigger the sensor.
	(Reposition the lamp away from the
	sensor or nearby objects).
	2. Light control is pointed toward a heat
	source like an air vent, dryer vent, or
	brightly-painted heat-reflective sur-
	face. (Reposition sensor).
	3. Light control is in Test. (Set control
	switch to an ON-TIME position).
Lights flash on	1. Heat or light from the lamps may be
and off.	turning the light control on and off.
	(Reposition the lamps away from the
	sensor).
	2. Heat being reflected from other objects
	may be affecting the sensor. (Reposi-
	tion sensor).
	3. Light control is in the Test mode and
	warming up.(Flashing is normal under
	these conditions).
	4. Light may be leaking through the flood
	lamp reflectors. (Make sure the metal
	lamp protectors are installed).

Technical Service

Please call 1-866-534-9718 (English speaking only) for assistance before returning product to store. If you experience a problem, follow this guide. If the problem persists, call* for assistance at 1-866-534-9718 (English speaking only), 8:00 AM to 6:00 PM CST (M-F).

*If contacting Technical Service, please have the following information available: Model Number, Date of Pur- chase, and Place of Purchase.

No Service Parts Available for this Product

Please keep your dated sales receipt, it is required for all warranty requests.

TWO YEAR LIMITED WARRANTY

This is a “Limited Warranty” which gives you specific legal rights. You may also have other rights which vary from state to state or province to province.

For a period of two years from the date of purchase, any malfunction caused by factory defective parts or workmanship will be corrected at no charge to you.

Not Covered - Repair service, adjustment and calibration due to misuse, abuse or negligence, light bulbs, batteries, and other expendable items are not covered by this warranty. Unauthorized service or modifica- tion of the product or of any furnished component will void this warranty in its entirety. This warranty does not include reimbursement for inconvenience, installation, setup time, loss of use, unauthorized service, or return shipping charges.

Please keep your dated sales receipt, it is required for all warranty requests.

Pentamark LLC reserves the right to discontinue products and to change specifications at any time without incurring any obligation to incorporate new features in products previously sold.

598-1351-01

MSL360FWPB specifications

Heath Zenith MSL360FWPB is a versatile motion-sensor floodlight designed to provide enhanced security and illumination for residential and commercial properties. This robust lighting solution boasts a host of innovative features and technologies that set it apart in the outdoor lighting market.

One of the standout characteristics of the MSL360FWPB is its large detection zone. The floodlight is equipped with a motion sensor that detects movement up to 240 degrees, covering areas that are typically more vulnerable to intrusions. This extensive range allows homeowners to benefit from increased security, as the light activates whenever movement is sensed within the designated area.

Another significant feature is the adjustable timer and sensitivity settings. Users can customize how long the light stays on after it detects movement, with options that typically range from a few seconds to several minutes. Additionally, the sensitivity can be fine-tuned to ensure that the light activates only when desired, reducing the chance of false alarms caused by passing animals or environmental factors.

The MSL360FWPB is not just about functionality; it also includes energy-efficient technologies. Utilizing LED bulbs, this floodlight provides bright illumination while consuming significantly less power than traditional incandescent bulbs. This energy efficiency not only leads to lower utility bills but also contributes to a more sustainable living environment.

Durability is another key characteristic of this floodlight. The MSL360FWPB is constructed from high-quality materials designed to withstand various weather conditions. With a weather-resistant rating, it can endure rain, snow, and extreme temperatures, ensuring reliable performance year-round.

Installation is made easy with the MSL360FWPB, as it includes a mounting bracket and necessary hardware, allowing for quick and hassle-free setup. This user-friendly approach means that even those with limited DIY experience can enjoy the benefits of enhanced outdoor lighting.

Overall, the Heath Zenith MSL360FWPB is a feature-rich motion-sensor floodlight that combines security, energy efficiency, and durability. Its customizable settings, broad detection range, and robust construction make it a preferred choice for property owners looking to illuminate and secure their spaces effectively. Whether for enhancing safety or simply for improved visibility, this floodlight is a reliable solution for any outdoor lighting need.