Test and Adjustment, Specifications | Heath Zenith 5716 specs

Aim Sensor

Higher for Long

Coverage

TEST AND ADJUSTMENT

❒Turn on the circuit breaker and light switch.

NOTE: Sensor has a 1 1/2 minute warm up period before it will detect motion.When first turned on or when switching modes wait 1 1/2 minutes.

❒Turn the RANGE control to the medium position (halfway between MIN and MAX), DualBrite® to OFF, and the ON-TIME control to the TEST position.

LAMP MODE

NORMAL SOFT FLASH

ON-TIME

DUAL BRITE™

MIN

MAX

TEST 1 5 20

OFF 3 6 DUSK TO

RANGE

MINUTES

HOUR DAWN

Bottom of Sensor

Avoid aiming the sensor at:

•Objects that change temperature rapidly, such as heat- ing vents and air conditioners. These heat sources could cause false triggering.

•Areas where pets or unwanted traffic may trigger the control.

•Nearby large,light-colored objects reflecting light may trigger the shut-off feature. Do not point other lights at the sensor.

270°

8 ft.

(2.4 m)

70 ft.	100 ft.
(21 m)	(30.5 m)
	Boosted
Maximum Range		Maximum

Coverage Angle

NOTE: If fixture is mounted higher than 8 ft. (2.4 m), aiming the sensor down will reduce coverage distance.

The detector is less sensitive to motion directly towards it.

	❒ Loosen the clamp screw in the	Clamp
	sensor ball joint and gently rotate	Clamp
	sensor ball joint and gently rotate	Screw
	the sensor.	Screw
	the sensor.
	❒ Walk through the coverage area	Ball
	noting where you are when the	Ball
	noting where you are when the	Joint
	lights turn on. Move the sensor	Joint
	lights turn on. Move the sensor
	head up, down, or sideways to
	change the coverage area.Keep
	the sensor at least 1" (2.5 cm)
	away from the lamps.	Aim Sensor
	❒ Adjust the RANGE as needed.	Down for Short
	RANGE set too high may	Coverage
	increase false triggering.

❒Secure the sensor head's aim by tightening the clamp screw.

Do not overtighten the screw. ❒ Set the amount ofTIME you want

the lights to stay on after motion is detected (1, 5, or 20 minutes).

❒Set the DualBrite® switch to the amount of time after dusk you want the lights on at low level (Off, 3, 6 Hrs., Dusk-to-Dawn).

❒Set the LAMP MODE switch to the desired light turn- on effect (Normal, Soft, Flash).

SPECIFICATIONS

Range . . . . . . . Up to 70 ft. (21 m); 100 ft. (30.5 m) with Range Boost.[varies with surrounding temperature]

Sensing Angle. . . . Up to 270°

Electrical Load. . . . Up to 300 Watts Maximum Incan- descent

Power Requirements. 120 VAC, 60 Hz

Operating Modes. . . TEST, AUTO and MANUAL MODE

Lamp Modes. . . . Normal, Soft, Flash Time Delay . . . . . 1, 5, 20 minutes

DualBrite® Timer. . . Off, 3, 6 hours, Dusk-to-Dawn

HeathCo LLC reserves the right to discontinue products and to change specifications at any time without incurring any obligation to incorporate new features in products previously sold.

MotionMotion

	Sensor
Least Sensitive	Most Sensitive

598-1307-01

5716 specifications

The Heath Zenith 5716 represents a cutting-edge approach to home security and convenience, expertly blending modern technology with user-centered design. This innovative outdoor motion-activated light has garnered attention for its powerful features and functionality, making it a top choice for homeowners seeking reliable illumination and enhanced safety.

One of the hallmark features of the Heath Zenith 5716 is its impressive motion detection capability. Equipped with a highly sensitive passive infrared (PIR) sensor, the device can detect movement from a considerable distance, ensuring that it activates only when necessary. This not only conserves energy but also provides a smart and efficient way to light up outdoor spaces, such as driveways, patios, and entryways. The adjustable sensitivity settings allow users to customize the detection range to suit their specific environment, reducing the likelihood of false alarms from passing cars or wildlife.

The light itself comes with a bright LED bulb which provides substantial illumination without incurring high energy costs. The LED technology is designed for longevity, offering a lifespan significantly longer than traditional incandescent bulbs. This efficiency is further enhanced by the automatic shut-off feature, which ensures that the light turns off after a preset duration if no further motion is detected, further conserving energy.

Installation of the Heath Zenith 5716 is often straightforward, with the fixture designed for easy mounting on walls or posts. The user-friendly design caters to both seasoned DIY enthusiasts and those less experienced with home improvement tasks. Additionally, the light is built to withstand various weather conditions, featuring a durable construction that resists rust and corrosion, making it an ideal choice for outdoor use.

Aesthetically, the Heath Zenith 5716 is available in a sleek design that can complement any exterior decor. Its modern appearance ensures that the light will blend seamlessly into any outdoor setting, enhancing the overall ambiance while serving its practical function.

Overall, the Heath Zenith 5716 combines an array of thoughtful features, advanced technologies, and user-friendly characteristics, making it an excellent option for anyone looking to enhance their home's safety and convenience. Whether you need a reliable security solution or simply want to light up your outdoor areas efficiently, this motion-activated light is a standout choice. As technology continues to advance, the Heath Zenith 5716 exemplifies the future of outdoor lighting, offering both functionality and style in one cohesive package.