Troubleshooting
icon appears on the | You cannot use the operation or function due to one of the following reasons: | |
screen. | (1) Your DVD disc does not support the feature (for example, angles) | |
(2) You've requested a title, chapter, or scan time that is out of the correct range. | ||
| ||
|
| |
Play mode settings are | The disc does not support all the selected functions. | |
different from the settings | ||
In this case, some settings you configure on the Setting menu may not work properly. | ||
configured with the | ||
| ||
Setting menu. |
| |
|
| |
Cannot change the | Aspect ratio is fixed for DVD disc. | |
aspect ratio. | ||
| ||
|
| |
No audio output. | Check whether you selected correct digital output options in the Audio Output Options menu. | |
|
| |
No video or audio output. | Did you move your DVD | |
The disc tray is ejected | ||
two hours with the power on, and then, insert the disc and try to playback again. It will work properly when condensation is removed. | ||
after 2 to 5 seconds. | ||
| ||
|
| |
Desired sound language | Angle operation is available only when the disc contains the images captured at different angles. | |
and subtitle language are | ||
| ||
not played. |
| |
|
| |
The remote control | • Check whether there is damage or foreign materials on your disc. | |
doesn't work. | • Some discs with bad manufacturing quality may not be played back. | |
| • If the scene changes from dark to bright suddenly, the screen may jitter temporarily, but it is not a defect. | |
|
| |
Angle operation does not | Sound languages and subtitle languages are | |
work during playback of a | ||
available and displayed on the disc menu. | ||
DVD disc. | ||
| ||
|
| |
Other problems | • Point the remote control at the remote control sensor on your DVD | |
Remove obstacles between your DVD | ||
| ||
| • Check whether the batteries are depleted. | |
|
| |
The disc revolves, but | • Read the table of contents and then find and read the sections describing your problem, and follow the directions given. | |
no image or bad quality | • Turn the unit off and on. | |
images are output. | • If your problem still persists, contact your nearest Samsung service center. | |
|
|
Tr o u b l e s h o o t i n g
12 |