Speaker Installation
Installing the DVD player | GB |
How to Install the Speaker and the Stand
1
STAND
STAND BASE
1 Mount the stand on the stand base and tighten 4
screws on the bottom side of the stand base.
2 Loosen 2 screws at the bottom of the back cover.
1 | 2 | |
STAND | ||
| ||
| BASE | |
| STAND | |
3 | 4 |
5 | 6 |
|
SPEAKER
STAND
1 Turn the stand upside down and mount it on the stand base.
2 Tighten 4 screws on the bottom side of the stand base.
3 Place the stand on the floor and tighten 2 screws on the back of the stand.
4 Mount the speaker on the stand.
5 Tighten 2 screws on the back of the speaker.
6 This is the successfully assembled speaker.
•Make sure that the speaker is installed on a flat and stable area. Otherwise it may be easily knocked over.
2
4
6 7
3
BACK
COVER
5
STAND
8
3 Detach the back cover by lifting it up.
4 Secure the main unit by aligning 4 protruding points on the back of the main unit with the fixing holes on the stand.
5 Tighten 2 screws in the middle of the stand.
6 Open a Toroidal Ferrite Core by pulling it upward. Wrap it around the top of the system connection cable so it will be next to the DVD Player. Close it back by pressing it all the way down until you hear a clicking sound.
7 Push the cable into the cable fixing hole in the stand.
8 To fix the cable, insert the cable holder into the hole on the stand.
9 Let the cable run through the hole at the bottom of the back cover and close the back cover.
10 Tighten 2 screws at the bottom of the back cover.
11 Open another Toroidal Ferrite Core by pulling it upward. Wrap it around the other end of the system connection cable so it is next to the subwoofer. Close it back by way down until you hear a clicking sound.
CONNECTIONS
Speaker Packages
Please confirm that all the following contents are included in the package.
|
| Speaker Accessories |
|
| Center Speaker |
| STAND BASE | |
SPEAKER STAND | Screw | Screw |
Toroidal Ferrite Core
9
System connection cable - main unit
10
BACK COVER
•The Toroidal Ferrite Core is designed to reduce electromagnetic waves that may cause interference.
Stand Packages
Please confirm that all the following contents are included in the package.
STAND BASE
Front/Rear Speaker (4EA) | Subwoofer Speaker | Speaker Cable (5EA) |
*Front speakers and rear speakers are packaged separately as shown in the diagram.
11
BACK COVER
STAND
Screw (6EA)
Holder Cable (3EA)
System connection cable - Main Unit to Subwoofer
12 | 13 |