Samsung HT-TXQ120R/XEE manual Setting the Audio, Setting the DRC Dynamic Range Compression

Settings (Con’t)

Setting the Audio

You can adjust the balance and level for each speaker.

1 In Stop mode, press the MENU button.

GB

Setting the DRC (Dynamic Range Compression)

This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.

2 Press the Cursor ▼ button to move to <Audio> and then press the ENTER button.

3 Press the Cursor ▼ button to move to <SOUND EDIT> and then press

MOVE ENTER RETURN EXIT the ENTER button.

4 Press the Cursor ▲,▼ button to select and adjust the desired item. Press the Cursor ◄,► button to adjust the settings.

Press the RETURN button to return to the previous level.

Press the MENU button to exit the setup screen.

MOVE ENTER RETURN EXIT

MOVE ENTER EXIT

CHANGE RETURN EXIT

1 In Stop mode, press the MENU button.

2 Press the Cursor ▼ button to move to <Audio> and then press the ENTER button.

3 Press the Cursor ▼ button to move to <DRC> and then press the ENTER button.

4 Press the Cursor ▲,▼ button to adjust the DRC.

„When the Cursor ▲ button is pressed, the effect is greater, and when the Cursor ▼ but- ton is pressed, the effect is smaller.

Press the RETURN button to return to the previous level. Press the MENU button to exit the setup screen.

Manually Adjusting the Speaker Volume and Balance with the SOUND EDIT Button.

Press the SOUND EDIT button and then press the Cursor ◄,► button.

Adjusting Front/Rear Speaker Balance

•You can select between 0, -6, and OFF.

•The volume decreases as you move closer to –6.

Adjusting Center/Rear/Subwoofer Speaker Level

•The volume level can be adjusted in steps from +6dB to –6dB.

•The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.

Setting the AV SYNC

Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to match the video.

2	Press the Cursor ▼ button to move to <Audio> and then press the	SETUP
1	In Stop mode, press the MENU button.
	ENTER button.
3	Press the Cursor ▼ button to move to <AV-SYNC>and then press the
MOVE ENTER RETURN EXIT	ENTER button.
4	Press the Cursor ▲,▼ button to select the AV-SYNC Delay Time and
	then press the ENTER button.

„You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status.

Press the RETURN button to return to the previous level.

MOVE ENTER RETURN EXIT

Press the MENU button to exit the setup screen.

52 53