Press Stop button, FM antenna connection

P.SCAN(Progressive Scan) Function

Unlike regular Interlace Scan, in which two fields of picture information alternate to create the entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of information (all lines displayed in one pass) to create a clear and detailed picture without visible scan lines.

Connecting the FM and AM Antennas	GB

1 Press STOP button.

•When disc is played back, press the STOP button twice so that “STOP”, appears on the display.

2 Press and hold P.SCAN button on the remote control for over 5 seconds.

•Pressing and holding the button for over 5 seconds will select "Progressive Scan" and "Interlace Scan" alternately.

•When you select P.SCAN, "P.SCAN" will appear on the display.

•To set P.Scan mode for DivX discs, press the P.SCAN button on the remote control for more than 5 seconds with no disc in the unit (“'NO DISC" on the display), then load the DivX disc and play.

What is Progressive (or Non-Interlaced) Scanning?

Interlaced Scan (1 FRAME = 2 FIELDS)

Progressive Scan (FULL FRAME)

If AM reception is poor, connect an outdoor AM antenna(not supplied).

FM Antenna (supplied)

FM antenna connection

AM Loop Antenna (supplied)

Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna.

AM antenna connection

CONNECTIONS

In interlaced-scan video, a frame consists of two inter-	The progressive scanning method scans one full frame of
laced fields (odd and even), where each field contains	video consecutively down the screen, line by line.
every other horizontal line in the frame.	An entire image is drawn at one time, as opposed to the
The odd field of alternating lines is displayed first, and	interlaced scanning process by which a video image is
then the even field is displayed to fill in the alternating	drawn in a series of passes.
gaps left by the odd field to form a single frame.	The progressive scanning method is desirable for dealing
One frame, displayed every 1/30th of a second, contains	with moving objects.
two interfaced fields, thus a total of 60 fields are dis-
played every 1/60th of a second.
The interlaced scanning method is intended for capturing
a still object.

1.Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal.

2.Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.

1.Connect the AM loop antenna supplied to the AM and terminals.

•Insert the black wire into the black terminal and the white wire into the white terminal.

2.If reception is poor, connect an outdoor single vinyl-covered wire to the AM terminal. (Keep the AM loop antenna connected).

Note	• This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support
	Progressive Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive
	scan TVs.)

•Depending on the brand and model of your TV, this function may not work.

Cooling Fan

The cooling fan supplies cool air to the unit to prevent overheating.

Please observe the following cautions for your safety.

• Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise and may damage it.

• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a newspaper or cloth, heat may build up inside the unit and fire may result.)

Samsung HT-TP33KR/XFO manual What is Progressive or Non-Interlaced Scanning?, Press Stop button