Test and Adjustment, Operation | Heath Zenith SH-7001 specification

TEST AND ADJUSTMENT

NOTE: Sensor has a 30 second warm up period before it will detect motion. When switching modes wait 30 seconds.

1.Slide the sensor switch to the TEST (center) posi- tion.

2.Place the RANGE adjustment in the medium position (halfway between MIN and MAX position).

RANGE

TEST

OFF AUTO

MIN MAX

Bottom of Sensor

3. Loosen the clamp screw in the sensor ball joint.

Ball Joint

Clamp Screw

4.Walk through the coverage area noting when the lights turn on. Gently move the sensor head up, down, or sideways to change the coverage area. Note: Wait 5 to 10 seconds after light turns off to retest.

Adjustment of Coverage Area

The sensor detects “motion” by the movement of heat (body heat) across the coverage area.However, following are examples of objects that also produce heat and can cause the sensor to false trigger:

•	Pools of Water	•	Air Conditioners
•	Dryer Vents	•	Fenced-In Animals
•	Heating Vents	•	Automobile Traffic

If you suspect that a heat source of this type is falsely triggering the sensor, try reducing the RANGE or aiming the sensor away from the heat source in question.

Note: The detector is less sensitive to motion directly towards it and more sensitive to across motion.

MotionMotion

	Sensor
Least Sensitive	Most Sensitive

OPERATION

Place the sensor switch in AUTO for normal operation.If the light is not needed, put the switch in the OFF position.

Mode:	On-Time	Works: Day	Night
Test	5 Seconds	x	x
Auto	30 Seconds		x

Aim Sensor Down for			Aim Sensor Higher for
Short Coverage			Long Coverage
			110°
8 ft.
(2.4 m)

60 ft.

(18.3 m)

Maximum Range	Maximum
	Coverage Angle

5.Increase RANGE only as needed. A larger RANGE setting may cause false triggering and reduce battery life.

6.Secure the sensor into position by tightening the clamp screw. Do not overtighten the screw.

7.After dark, adjust the light to cover desired area.

Things To Remember

•Periodically clean the solar panel with a soft cloth and warm water.Do not hose spray.Keep the collector clear of snow and leaves. Make sure trees and other objects do not block sunlight from the panel.

•If not to be used for several weeks, turn the unit OFF. Store it with the panel connected and where the panel can gather sunlight.

•Solar collection is only effective in direct sunlight.Every hour the light is on requires a minimum of 16 hours of sunlight charging. Solar panels collect less than 10% of the sun’s energy. Light bulbs convert this energy to light at 5% efficiency.

•Several days of use with overcast skies may discharge the battery.Because of the battery protection circuit, the light will not work until the battery is fully recharged.

•This light is supplied with a 15 Watt, bi-pin, halogen bulb. Note: Using a larger bulb will decrease battery life.

598-1164-04

SH-7001 specifications

The Heath Zenith SH-7001 is a state-of-the-art motion-activated security light designed to enhance the safety and security of residential and commercial properties. Known for its durability and efficiency, the SH-7001 has garnered attention for its cutting-edge technology and user-friendly features.

One of the main features of the SH-7001 is its advanced motion detection capability. Equipped with a high-performance PIR (Passive Infrared) sensor, it can detect motion up to 70 feet away, providing a wide coverage area. The sensor is adjustable, allowing users to modify the range, sensitivity, and duration settings, ensuring customizable performance that suits their specific needs. This adaptability makes it an ideal choice for various locations, whether illuminating a driveway, backyard, or walkway.

The SH-7001 also boasts a powerful 150-watt halogen bulb, delivering bright illumination to deter potential intruders and provide enhanced visibility. The light’s sturdy design ensures that it can withstand various weather conditions, making it suitable for outdoor use. Its corrosion-resistant housing and weatherproof construction mean that it can function optimally in rain, snow, or sunlight, providing reliable service year-round.

Another notable characteristic of the Heath Zenith SH-7001 is its ease of installation. The product comes with clear instructions, and most users can set it up in less than an hour. The light can be mounted on walls, fences, or posts, making it versatile for different property types.

Furthermore, the SH-7001 incorporates energy-saving technology. The motion-activated feature ensures that the light is only on when needed, reducing energy consumption and lowering electricity bills. Combined with the longevity of halogen bulbs, users can enjoy the benefits of the light without the worry of frequent replacements.

Finally, the design of the SH-7001 is aesthetically pleasing, allowing it to blend seamlessly with various architectural styles. This makes it not only a functional choice but also a stylish addition to any property.

In summary, the Heath Zenith SH-7001 combines advanced motion detection, robust durability, ease of installation, energy efficiency, and stylish design to offer a reliable solution for enhancing security and illumination around homes and businesses.