Zanussi ZDTS 101 user manual Load cutlery and dishes, Adjusting the dosage of rinse aid

Models: ZDTS 101

1 28
Download 28 pages 55.49 Kb
Page 12
Image 12
Adjusting the dosage of rinse aid

Load cutlery and dishesCAUTION!

Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance.

Top up the rinse aid indica- tor (B) becomes clear

Adjusting the dosage of rinse aid

Increase the dose if there are drops of water or lime spots on the dishes after washing.

Reduce the dose if there are whitish streaks on the dishes or a bluish film on glassware or knife blades.

Open the lid.

Set the dosage level. (The

 

dose is factory set in po-

 

sition 4).

Close the lid and press un- til it locks.

Load cutlery and dishes

Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher.

Before loading the dishes, you should:

Remove all left over food and debris.

Soften remnants of burnt food in pans

When loading the dishes and cutlery, please note:

Dishes and cutlery must not impede the rotation of the spray arms.

Load hollow items such as cups, glasses, pans, etc. with the opening downwards so that water cannot collect in the container or a deep base.

Dishes and items of cutlery must not lie inside one another, or cover each other.

12

Page 12
Image 12
Zanussi ZDTS 101 user manual Load cutlery and dishes, Adjusting the dosage of rinse aid