Heath Zenith 2LBN2 specifications Motion Sensor Quartz Security Light, Specifications

Operating Instructions & Parts Manual 2LBN2

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or main- tain the product described. Protect yourself and others by observing all safety information. Failure to comply could result in personal injury and/or property damage! Save these instructions for future reference.

®

SPECIFICATIONS

Range	. Up to 70 ft. (21 m); 100 ft.
	(30.5 m) with Range Boost.
	[varies with surrounding
	temperature]
Vertical Range. . .	. Up to 15 ft. (4.6 m)
Sensing Angle. . .	. Up to 240° horizontal. Up to 80°
	Vertical
Electrical Load. . .	. Up to 500 Watts Maximum In-
	candescent
Power Requirements. 120 VAC, 60 Hz
Operating Modes. .	. TEST, AUTO, and MANUAL
	MODE
Time Delay . . . .	. 1, 5, 20 minutes

Replacement Lamp. . T3 500 Watt (or less) halogen

120 VAC

DualBrite® Timer. . . OFF, 3, 6 hours, Dusk-to-Dawn

This package includes: 1 Light control

1 Gasket

1 Halogen Bulb

1 S-hook

6 Screws (3 sizes)

3 Wire connectors

Additional Items needed:

•Screwdriver

•Pliers to tighten locknut

•Ladder

Motion Sensor Quartz

Security Light

Requirements

•The light control requires 120-volts AC.

•This fixture is designed for wall mounting only.

•If you want to use Manual Mode, the control must be wired through a switch.

•Some codes require installation by a qualified electrician.

•This product is intended for use with the enclosed gasket and with a junction box marked for use in wet locations.

•The backplate has knockouts so the sensor can be mounted on most junction boxes.

•In some applications a universal adaptor plate may be needed. Adaptors are available at Home Centers and Electrical Supply Stores.

NOTE: DualZone™ adds a zone of detection under the motion sensor. DualZone™ requires no additional adjustment and operates in conjuction with the for- ward-looking sensor.

	598-1114-04
HEA 010	LPG-5311
Printed in China
09/07