Heath Zenith SH-5407 Installation, Test and Adjustment, Wire the Light Control, Mount the Light

Page 2

INSTALLATION

For under eave installation, the sensor head must be rotated as shown in the next two steps for proper operation and to avoid the risk of elec- trical shock.

For eave mount only:

Swing the sensor head towards the clamp

screw.

Controls

Clamp Screw

Rotate the sensor head clockwise 180° so the controls face down.

Controls

Controls

If the sensor pops out of the ball joint, loosen the clamp screw and push the sensor back into the ball joint. Tighten the clamp screw when done.

These instructions show the sensor wired to fl ood- lamps.The white sensor wire is neutral.The black sensor wire is hot. The red wire is the switched "hot" wire. The lighting load (500 W, 4.2A max) is placed across the white and red wires.

WIRE THE LIGHT CONTROL

WARNING:Turn power off at circuit breaker or fuse.

Remove the existing light fi xture, if present.

After screwing the sensor into the wall plate, connect the junction box wires to the light control wires by twisting together and securing with wire connectors.

 

 

Red Sensor Wire to

White to White

 

Black Lamp Wire

 

 

 

Junction

Box

Lamp Holders

Black to Black

Optional: Connect additional load across the white and red wires. Total lighting load including lampheads on fi xture must not exceed 500W (4.2A).

MOUNT THE LIGHT

Followtheinstructionsthatcamewithyourlightfix- ture for mounting and adjusting the light fixture.

Keep regular PAR-38 lamps at least 1" (25 mm) from the sensor. Halogen lamps should be kept at least 2" (51 mm) from the sensor.

TEST AND ADJUSTMENT

Turn on the circuit breaker and light switch.

NOTE: Sensor has a 1 1/2 minute calibration period before it will detect motion. When fi rst turned on, wait 1 1/2 minutes.

-2-

598-1155-01

Image 2
Contents Operation FeaturesMode Switching Summary Model SH-5407Wire the Light Control InstallationTest and Adjustment Mount the LightMaximum Range SpecificationsBottom of Sensor Coverage AngleNo Service Parts Available for this Product Troubleshooting GuideTechnical Service TEN Year Limited WarrantyCaracterísticas FuncionamientoModelo SH-5407 RequisitosConecte EL Control DE LUZ InstalacionPrueba Y Ajuste Instale EL Control DE LUZAlcance Máximo Angulo de EspecificacionesParte de abajo del detector Lo menos sensibleServicio Técnico Garantía Limitada a 10 Años

SH-5407 specifications

The Heath Zenith SH-5407 is a sophisticated and versatile motion-activated security light that stands out for its blend of advanced technologies, practical features, and robust design. Ideal for enhancing home security, this outdoor lighting solution employs innovative detection technologies to provide reliable performance and maximum convenience.

One of the standout features of the SH-5407 is its dual-head design, which allows users to adjust the orientation of the lights independently. This flexibility ensures that the light can cover multiple areas or specific points of interest around your property, enhancing visibility and security. The high-powered LED bulbs used in these fixtures are not only energy-efficient but also incredibly bright, illuminating a wide area while consuming minimal electricity. This makes it both an eco-friendly and cost-effective lighting option.

At the heart of the SH-5407 is its state-of-the-art motion detection technology. The unit boasts a motion sensor with a range of up to 70 feet and a coverage angle of 180 degrees. This wide detection range ensures that any movement within a significant radius is immediately picked up, activating the light and deterring potential intruders. The sensor’s adjustable sensitivity and time delay options empower users to customize their settings according to their preferences and environment, resulting in tailored security solutions.

A significant advantage of the Heath Zenith SH-5407 is its durability and resistance to harsh weather conditions. Designed for outdoor use, the unit features a weatherproof casing that protects it from rain, snow, and extreme temperature fluctuations. Its robust construction guarantees longevity, making it a reliable addition to any outdoor security system.

Installation of the SH-5407 is straightforward, aided by the unit’s user-friendly design. The included mounting hardware simplifies the process, allowing homeowners to set up the light quickly and efficiently. This ease of installation, combined with versatile mounting options, means that users can place the light wherever it is most needed without hassle.

Additional features, such as the manual override function, enable users to keep the lights on for extended periods, providing additional security during events or gatherings. Overall, the Heath Zenith SH-5407 combines advanced functionality with user-friendly features, making it a top choice for those seeking effective outdoor lighting solutions for both security and convenience.