Troubleshooting
PROBLEM | SOLUTION | |
|
| |
Motor does not start. | • Check cable, pulg and socket. | |
• Leave to cool. | ||
| ||
|
| |
Suction force is | • Check for blockage and remove. | |
gradually decreasing. | ||
| ||
|
| |
Cord does not rewind | • Pull the cord out | |
fully. | ||
| ||
|
| |
Vacuum cleaner does | • Check hose and replace if required. | |
not pick up dirt. | ||
| ||
|
| |
Low or decreasing | • Please check filter and, if required, clean as illustrated in the | |
instructions. if filters are out of condition change them to new | ||
suction. | ||
ones. | ||
| ||
Body overheating. | • Please check filters, if required clean as illustrated in the | |
instruction. | ||
| ||
|
| |
Static electicity | • Please decrease power suction. | |
• This can also occur when air in the room is very dry. | ||
discharge. | ||
Please ventilate the room to air humidity become a normal. | ||
|
This Vacuum cleaner is approved the following.
EMC Directive : 2004/108/EC
Low Voltage Directive : 2006/95/EC
Troubleshooting _19