Samsung VC20AHNDCNC/SB, VC20AHNDC6B/SB manual Troubleshooting, Problem Solution, Rewind button

troubleshooting

PROBLEM		SOLUTION
Motor dows not start.	• Check cable, pulg and socket.
	•	Leave to cool.
Suction force is gradually	•	Check for blockage and remove.
decreasing.
Cord does not rewind fully.	• Pull the cord out 2-3m and push down the cord
		rewind button.
Vacuum cleaner dows not pick	•	Check hose and replace if required.
up dirt.
	• Please check filter and, if required, clean as
Low or decreasing suction		illustrated in the instructions. if filters are out of
		condition change them to new ones.
Body overheating	• Please check filters, If required clean as
		illustrated in the instruction.
Static electicity discharge	•	Please decrease power suction.

This Vacuum cleaner is approved the following.

EMC Directive : 2004/108/EEC

Low Voltage Directive : 2006/95/EC

16_ troubleshooting