Technical specification

RECOMMENDED OPERATING CONDITIONS

Room temperature

21 ÷ 35°C

TECHNICAL SPECIFICATION

Power supply		see rating plate
Max. absorbed power
in air conditioning		“
Refrigerating capacity		“
Refrigerant		“
Number of fan speeds		3 + silent
Max. air flow .		370 m3/h
Dimensions:
•	width	580 mm
•	height	785 mm
•	depth	435 mm

ENGLISH

ELECTRICAL CONNECTION (U.K. ONLY)

A)If your appliance comes fitted with a plug, it will incorporate a 13 Amp fuse. If it does not fit your socket, the plug should be cut off from the mains lead, and on appropriate plug fitted, as below. warning: Very carefully dispose of the cut off plug after removing the fuse: do not insert in a 13 Amp socket elsewhere in the house as this could cause a shock hazard. With alternative plugs not incorporating a fuse, the circuit must be protected by a 15 Amp fuse. If the plug is a moulded- on type, the fuse cover must be re-fitted when changing the fuse using a 13 Amp Asta approved fuse to BS 1362. In the event of losing the fuse cover, the plug must NOT be used until a replacement fuse cover can be obtained from your nea- rest electrical dealer. The colour of the correct replacement fuse cover is that as marked on the base of the plug.

B)If your appliance is not fitted with a plug, please follow the instructins provided below:

WARNING - THIS APPLIANCE MUST BE EARTHED

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code:

Green and yellow Earth

BlueNeutral

BrownLive

As the colours of the wires in the mains lead may not corre- spond with the coloured markings identifying the terminals in your plug, proceed as follows:

The green and yellow wire must be connected to the termi- nal in the plug marked with the letter E or the earth symbol

or coloured green or green and yellow.

The blue wire must be connected to the terminal marked with the letter N or coloured black.

The brown wire must be connected to the terminal marked with the letter L or coloured red.