Samsung SF-755P manual Paper Specifications, Paper Output Capacity

Symptom	Problem with Paper	Solution
Jamming, damage to	Cutouts or perforations	Do not use paper with cutouts or
machine		perforations.
Problems with feeding	Ragged edges	Use good quality paper.

NOTES:

•Do not use letterhead paper printed with low-temperature inks, such as those used in certain types of thermography.

•Do not use raised or embossed letterhead.

•The machine uses heat and pressure to fuse toner to the paper. Insure that any colored paper or preprinted forms use inks that are compatible with this fusing temperature (200 °C or 392 °F for 0.1 second).

Paper Specifications

Category	Specifications
Acid Content	5.5 pH or lower
Caliper	0.094 ~ 0.18 mm (3.0 ~ 7.0 mils)
Curl in Ream	Flat within 5 mm (0.02 in.)
Cut Edge Conditions	Cut with sharp blades with no visible fray.
Fusing Compatibility	Must not scorch, melt, offset or release hazardous
	emissions when heated to 200 °C (392 °F) for 0.1
	second.
Grain	Long Grain
Moisture Content	4 % ~ 6 % by weight
Smoothness	100 ~ 400 Sheffied

Paper Output Capacity

Output Location	Capacity
Face-down output tray	150 sheets of 75 g/m2 bond (20 lb) paper
Face-up output slot	1 sheet of 75 g/m2 bond (20 lb) paper

A

APPENDIX A.11