Samsung SF-755P manual Guidelines for Using Paper, Transparency films

Size (mm/in.)	Weight	Capacity*
Labels	120 to 150 g/m2
Letter (215.9 x 279/8.5 x 11)
A4 (210 x 297/8.27 x 11.69)
Transparency films	138 to 146 g/m2
Letter (215.9 x 279/8.5 x 11)
A4 (210 x 297/8.27 x 11.69)		1 sheet of paper for the
Card stocks		manual feeder
A6 card (105 x 148/4.13 x 5.88)	90 to 163 g/m2
Post Card (101.6 x 152.4/4 x 6)
Hagaki (100 x 148/3.94 x 5.83)
Minimum size (custom)	60 to 120 g/m2 bond
Maximum size (Legal)	(16 to 32 lb)

*. Capacity may vary depending on print materials’ weight and thickness, and environmental conditions.

NOTE: You may experience jams when using print materials with a length of less than 127 mm (5 in.). For optimum performance, ensure that you are storing and handling the paper correctly. Please refer to “Paper Storage Environment” on page .12.

Guidelines for Using Paper

For best results, use conventional 75 g/m2 (20 lb) paper. Ensure that the paper is of good quality, and free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, voids, and curled or bent edges.

If you are unsure of what type of paper you are loading, such as bond or recycled paper, check the label on the package.

The following problems may cause print quality deviations, jamming or even damage to the machine:

Symptom	Problem with Paper	Solution
Poor print quality or toner	Too moist, too rough, too	Try another kind of paper,
adhesion, problems with	smooth or embossed; faulty	between 100 ~ 400 Sheets, 4 ~
feeding	paper lot	5 % moisture content.
Dropout, jamming, curl	Stored improperly	Store paper flat in its moisture-
		proof wrapping.
Increased gray background	Too heavy	Use lighter paper, use the rear
shading/machine wear		output slot.
Excessive curl problems with	Too moist, wrong grain	• Use the rear output slot.
feeding	direction or short-grain	• Use long-grain paper.
	construction

A.10 APPENDIX