Polycom ™ RSS 2000 V1.0
Getting Started guide
General Safety Precautions
Follow these rules to ensure general safety:
•Keep the area around the Polycom RSS 2000 unit clean, free of clutter and well ventilated.
•Decide on a suitable location for the equipment rack that will hold
the RSS 2000 unit and is near a grounded power outlet.
•• Use a regulating uninterruptible power supply (UPS) to protect the RSS 2000 unit from power surges and voltage spikes, and to keep it operating in case of a power failure.
Hardware Specification
Pentium 4, 2.8Mhz,1.5G RAM,250G Hardisk.
•Form Factor: 1U 19” rack mount
•Height: 1.73” (44 mm)
•Width: 16.83” (430 mm)
•Depth: 15.35” (390 mm)
•Gross Weight: 22.4 lbs (10.2 kg)
•Power Supply: Thermal controlled 220W ATX AC power supply w/PFC
•AC Voltage: 100 - 240 VAC,
XP OS
Preparations
Obtain the following information from your network administrator:
•RSS 2000 unit, Subnet Mask and Default Gateway IP addresses
•Gatekeeper IP address, Prefix, and E.164 of the RSS 2000.
DOC2153A | RSS 2000 Getting Started guide + Corrections- V1.0.1.002.doc.1.002 |
Page 1 |
|
