![](/images/new-backgrounds/1170760/1707603x1.webp)
Unpacking and Installing the RSS 2000
1 Place the RSS 2000 unit on a stable flat surface in the selected location.
2 To connect to the power source, insert the power cable into the Power connector on the rear panel of the MGC+ unit and insert the Power cable into the power source socket.
3 Connect the lan cable to LAN1 in the back of the system.
4 Turn on the power switch.
DOC2153A | RSS 2000 Getting Started guide + Corrections- V1.0.1.002.doc.1.002 |
Page 2 |
|