❶ ❷ ❹ ❸ ❺ ❶ ❷ ❹ ❸, Output Panel Layout

POWER AMPLIFIER OWNER’S MANUAL

1.Fuses – For convenience, all amplifiers utilize ATC type fuses. For continued protection in the event that a fuse blows, replace the fuse only with the same value.

Caution: The power fuses on the amp are for protecting the amp against overdrive. To protect the vehicle’s electrical system, an additional fuse is required within 18" of the battery on the 12V+ cable.

Thunder202 – 20 Amp

Thunder282 – 30 Amp

Thunder404 – 25 Amp x 2

2.Power Terminal – This is the main power input for the amplifier and must be connected directly to the positive terminal of the car battery for the amplifier to operate properly. See the chart below for recommend- ed cable sizes for each amplifier. Use caution when running this cable through the car. Try to avoid the input RCA cables, antenna cabling, or other sensitive equipment as the large amount of current flowing through this cable can induce noise into your system. It is also very important to have a tight connection to ensure maxi- mum performance.

Thunder202 – 10 Gauge

Thunder282 – 10 Gauge

Thunder404 – 8 Gauge

3.Ground Terminal – A good quality ground is required for your Thunder amplifier to operate at peak per- formance. A short length of cable the same gauge as your power cable should be used to attach the ground terminal directly to the chassis of the car. Always scrape or sand any painted surfaces to expose bare metal where the ground wire will attach.

4.Remote Terminal – All Thunder Amplifiers can be turned on by applying 12 volts to this terminal. Typically this voltage is supplied by a wire from the source unit marked “remote” or “electric antenna”.

5.Speaker Terminals – As shown in the wiring diagrams, be sure to observe speaker polarity through the sys- tem. Failing to wire the speakers in proper phase could result in a loss of bass response and/or poor overall sound quality. Caution: Thunder amplifiers are not recommended for loads below 2 ohms stereo or 4 ohms bridged.

6.Power LED (top of heatsink) – A lighted LED indicates that power has been applied to the amplifier. +12V from the battery to the +BATT terminal and +12V from a switched ignition or remote lead from a head unit. An unlighted LED indicates power has been removed or the amplifier has overheated. In the case of the overheat condition, the amplifier will turn back on after it cools down.

Output Panel Layout

❺

❶ ❷ ❹ ❸

❺

❶ ❷ ❹ ❸

❺ ❶ ❷ ❹ ❸

Thunder404, Thunder202, Thunder282 specifications

MTX Audio has long been a recognized name in the world of audio equipment, and their Thunder series subwoofers, specifically the Thunder282, Thunder202, and Thunder404, showcase the brand's commitment to delivering high-quality sound performance, durability, and cutting-edge technology.

The Thunder282 is designed for audiophiles seeking powerful bass and impressive sound clarity. Its dual voice coil design allows for flexible wiring options, enabling users to optimize the subwoofer's performance according to their preferences. This model features a robust and lightweight cone construction, which not only enhances sound reproduction but also contributes to the overall efficiency of the subwoofer. With a peak power handling capability of 2800 watts, the Thunder282 guarantees an impactful audio experience that adds depth to any music genre or movie soundtracks.

Moving on to the Thunder202, this model is an excellent choice for those looking to achieve solid bass without compromising on available space. Despite its compact design, the Thunder202 packs a punch with a peak power of up to 1200 watts. The subwoofer is equipped with a surround that helps in minimizing distortion, resulting in a cleaner sound output. Its integrated cooling system is another notable feature, preventing overheating during extended use, thus ensuring lasting performance.

Finally, the Thunder404 stands out with its innovative technologies tailored for bass enthusiasts. Sporting a peak power of 4000 watts, this model is engineered to deliver mind-blowing low frequencies that can transform a standard audio system into a high-impact sound experience. The Thunder404 incorporates a unique venting design to improve airflow around the coil, which helps in enhancing thermal performance. Additionally, the subwoofer employs advanced materials for its cone and surround, optimizing the overall durability and longevity, even under demanding conditions.

Overall, the MTX Audio Thunder series, comprising the Thunder282, Thunder202, and Thunder404, presents a comprehensive range of options for consumers. Each model showcases unique features and specifications that cater to different audio needs, ensuring that users find the perfect fit for their sound system. With advancements in technology, a focus on high performance, and a commitment to quality, MTX Audio continues to lead the way in the automotive and home audio markets. Whether for musical enjoyment or movie watching, the Thunder series delivers powerful and engaging sound that elevates the overall listening experience.