Software Installation and Verification

Software Installation

Software Installation

Running Swinstall

The ACC software is read from the HP-UX Application CD-ROM, in superuser mode, using the swinstall utility. The steps are shown below.

Step 1. Log in to the system as “root”.

Step 2. Place the media in a local or remote CD-ROM drive.

Step 3. Run swinstall, which behaves the same in the GUI interface as for the terminal interface. When the “Specify Source” box opens, select “Source Depot Type” to “Local CDROM”, or for a remote CD-ROM driver, select for “Network Directory/CDROM” and set “Source Host Name...”. Select “OK”.

Step 4. Select the ACC Developer Software Suite product and any other ACC items to be installed, from the list of software bundles; open the “Actions” menu and select “Mark for Install”.

Step 5. When all items have been marked, select “Install (analysis)”; select “OK” and proceed.

The “Install (analysis)” window allows you to track summary progress of the installation process. Use the “Logfile” feature to display a detailed status, which is logged to /var/adm/sw/swagent.log.

18

Chapter 2