HP Advanced Communications Controllers (ACC) manual Predefined Configuration Values

CAUTION

Protocol Specific Configuration

Predefined Configuration Values

Predefined Configuration Values

The following configuration values are currently defined for use in HDLC/LAP-D configuration as a replacement for the POLL and SELECT address fields. These values are used (for example HDLC_DTE_3.0) as a symbolic way of configuring the associated two 16-bit hexadecimal values.

If a particular desired configuration value is not provided by these values, then two hexadecimal values can be used instead (as for normal poll and select specification).

HDLC_DTE_400MS and HDLC_DCE_400MS

N201 = 0128 bytes
T200	= 400ms			K = 3		N200 = 10
Equivalent parameters
HDLC_DTE_400MS -			8080h		146Ah
HDLC_DCE_400MS -			0080h		146Ah
HDLC_DTE_3.0	and	HDLC_DCE_3.0
N201	= 1024		bytes
T200	= 3.0sec			K = 3,		N200 = 10
Equivalent parameters
HDLC_DTE_3.0 -			8400h		4F6Ah
HDLC_DCE_3.0		-	0400h		4F6Ah

Note that specific user defined configurations may be added to the ttgen configuration file. These should use the #define statement and be placed at the beginning of the file. Refer to the examples in the file /opt/acc/cfg/ttgendefine.

DO NOT make changes to the /opt/acc/cfg/ttgendefine file itself, since this is part of the ACC Base product software, and may be overwritten when updates to the product are applied.

Chapter 4 45