Protocol Specific Configuration

Introduction

Introduction

This section provides specific information on preparing the network configuration file when HDLC/LAP-D is to be used.The parts of the network configuration answer file relevant to HDLC/LAP-D are:

•Interface-Definition

•Port-Definition

•Subchannel-Definition

•Terminal-Definition

Interface-Definition

An ACC Interface-Definition line appears in the configuration file for each ACC card that will have LAP-D connections configured on it.

A sample Interface-Definition is as follows:

Z7300A

00

0:8

/opt/acc/z7300a/lapd.zabs

Z7300A

01

0:16

/opt/acc/z7300a/lapd.zabs

Port-Definition

The ports used must be defined. The definition is dependent upon the ACC card and interface that is being used.

A sample Port-Definition for the 4-channel T1/E1 card using the E1 interface with BNC connectors is as follows:

Port 01:4 E1BNC Int DF HDB3

Refer to the ACC Utilities Reference Guide section on ttgen for details.

40

Chapter 4