Functioning and use, Adjusting the thermostat

c.No electric cables or other pipes could be damaged during the installation.

d.Keep away from curtains or inflammable materials.

To wall-mount, proceed as follows:

For brick walls use a 15/64" (6 mm) concrete drill bit . For plaster board or false (hollow) walls, it is recommended to use appropriate screws and anchors (not supplied).

1.Before drilling the wall, mark out a template using the mounting bracket respecting the minimum distances as shown in fig. 3.

2.Drill the wall where previously marked, and insert the plastic anchors.

3.Fix the bracket with the 2 screws provided (see fig. 4).

4.Hang the heater on the bracket.

5.Mark out the 2 lower fixing points (fig. 2). Remove the appliance, drill the lower holes and insert the wall anchors.

6.Now, you can hang back the heater to the bracket and fix the lower part of the appliance with the 2 remaining screws.

5. Functioning and use

-Insert the plug into the mains.

-Turn the thermostat knob in a clockwise direction until it reaches the 6 setting.

-Minimum power (750W): turn the function knob to setting “MIN” (the pilot light will light on).

-Maximum power(1500W): turn the function knob to setting “MAX” (the pilot light will light on).

-Switching off: turn the function knob to setting“OFF” and remove the plug.

6. Adjusting the thermostat

Turn the thermostat knob in a clockwise direction until it reaches the maximum setting (6). When the room has reached the desired temperature, slowly turn the thermostat knob counter-clockwise until you hear a click and not beyond. The thermostat will now adjust the set temperature automatically keeping it constant.

7. Frost prevention mode

With the thermostat dial at minimum and the mode selector on "MAX", the appliance maintains room temperature at about 41° F (5°C), preventing freezing with minimal energy consumption.

8. Maintenance

Before carrying out any maintenance, unplug the heater from the mains and wait for it to cool off completely. This heater requires no particular maintenance. It is sufficient to remove the dustwith a soft, dry cloth. Never use abrasive powders or solvents. If necessary remove concentrated areas of dirt with a vacuum cleaner.

9. Warnings

-Do not use the heater in the vicinity of bathtubs, wash basins, showers or swimming pools.

-Never use the heater to dry laundry.

-Never place the power cable on top of the heater while it is hot.

-Only use the heater in an upright position.

-If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

-Do not use your heater with a power strip or extension cord. Overheating of a power strip or extension cord could result in a fire.

-As with any electrical appliance, whilst the instructions aim to cover as many eventualitiesas possible, caution and common sense should be applied when operating your appliance, particularly in the vicinity of young children.

-The appliance is fitted with a tilt-switch which turns the appliance off should it fall over or become unstable. To restart the appliance, simply place it upright again.

The appliance is fitted with a safety auto shut-off device which will switch the appliance off in case of accidental overheating. To reset, disconnect the plug from the power socket for a few minutes, remove the cause of overheating then plug the appliance in again.

WARNING: In order to avoid overheating, never under any circumstances cover the appliances during operation, as this would lead to dangerous overheating.

HMP1500 specifications

The DeLonghi HMP1500 is a sleek and efficient portable heater that offers an effective solution for heating small to medium-sized rooms. With its modern and slim design, this heater not only adds style to your space but also delivers warmth where it is needed most, making it a popular choice among consumers seeking comfort during the colder months.

One of the standout features of the HMP1500 is its unique heating technology. The heater utilizes both a convection and radiant heating system, allowing it to warm up spaces quickly and evenly. The convection heating works by circulating warm air throughout the room, while the radiant heating directly warms objects and people in its path, ensuring consistent comfort.

The HMP1500 is equipped with a powerful 1500-watt heating element that allows it to efficiently raise the temperature of any room. Moreover, it offers two heat settings, allowing you to customize the amount of warmth to your preferences. Whether you need a gentle warmth for a cozy evening or full heat to combat frigid temperatures, the HMP1500 adapts to your needs effortlessly.

Safety is a priority with the DeLonghi HMP1500. It features an adjustable thermostat that allows users to set their desired temperature and maintain it, effectively preventing overheating. Additionally, the heater includes an automatic shut-off feature that activates if the unit is tipped over or overheats, providing peace of mind for users with children or pets.

The design of the HMP1500 also emphasizes user convenience. It comes with an easy-to-use control panel that allows for straightforward adjustments of heat settings and temperature. The compact size of the heater makes it portable, allowing users to easily move it from room to room as needed.

For added convenience, the HMP1500 comes equipped with a thermal cut-off feature that ensures the heater does not operate when shuttered, ensuring efficiency and longevity. The inclusion of a built-in handle also aids in mobility, making it easy to transport from one space to another.

In conclusion, the DeLonghi HMP1500 is an outstanding portable heating solution, combining advanced heating technologies with user-friendly features and a modern design. Its ability to deliver efficient heating, coupled with robust safety measures, makes it an excellent choice for anyone looking to stay warm during the chilly months.