Important Safety Instructions

When using electrical appliances, basic precautions including the following should always be observed to reduce risk of ﬁre, electric shock, and injury to persons.

Read and save all instructions before using the heater.

1.Caution: high temperature. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet from the front of the heater and away from the sides and rear.

2.Extreme caution is necessary when any heater is used by or near children or disabled persons and whenever the heater is left operating and unattended.

3.Always unplug heater when not in use.

4.Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Return heater to authorized service facility for examination, electrical or mechanical adjustment or repair.

5.Do not use outdoors.

6.This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.

7.Do not run cord under carpeting. Do not cover cord with throw rugs, runners or the like. Arrange cord away from trafﬁc area, and, where it will not be tripped over.

8.To disconnect heater, turn controls to off, then remove plug from outlet.

9.Connect heater to an appropriate electrical outlet which meets the electrical ratings as marked on the heater.

10.Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock, ﬁre, or damage to the heater.

11.To prevent a possible ﬁre, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.

12.A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint or ﬂammable liquids are used or stored. Do not use in areas having loose combustible materials, which can enter heater. Ensure heater is kept clean.

13.Do not use in areas where there is a risk of build up of ﬂammable materials.

14.Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause ﬁre, electric shock, or injury to persons.

15.Avoid the use of an extension cord because the extension cord may overheat and cause a risk of ﬁre. However, if you have to use an extension cord, the cord shall be 14AWG minimum size and rated not less than 1500 watts.

16.WARNING: This heater has a polarized plug (one blade is wider than the other). As a safety feature, this plug will ﬁt in a polarized outlet only one way. If the plug does not fully ﬁt the outlet reverse the plug. If it still does not ﬁt consult a qualiﬁed electrician. 17. Never use with an extension cord if the plug cannot be fully inserted. Do not attempt to defeat this safety feature.

17.Should the air intakes become blocked during operation the unit will shut down and remain off. To reset: Unplug heater, ensure all intakes are free of obstructions, and let unit cool for 10 minutes before restarting.

Caution! Keep out of the reach of children.

Speciﬁcations 120 volts, 60 Hz, 13.2 Amps, 1500 Watts, 6 ft. cord (1.83 m)

9206 specifications

The Caframo 9206 is an innovative, compact, and powerful marine fan designed to enhance comfort aboard boats and small yachts. Known for its durability and versatility, this fan is engineered to provide optimal airflow while being energy efficient, making it a popular choice among sailors and boat enthusiasts.

One of the standout features of the Caframo 9206 is its adjustable speed settings. The fan is equipped with a three-speed switch, allowing users to choose between low, medium, and high airflow depending on their specific needs and preferences. This versatility ensures that users can maintain a comfortable environment regardless of the conditions outside, maintaining airflow even in the warmest climates.

The fan's swivel base is another key characteristic that sets the Caframo 9206 apart. This feature enables 180-degree vertical tilt, allowing users to direct airflow wherever it is needed most. Whether cooling off a small cabin or providing ventilation in a galley, the adjustable airflow direction is essential for maximizing comfort.

Designed specifically for marine use, the Caframo 9206 is built with rugged materials that can withstand the harsh marine environment. Its UV-resistant plastic housing helps protect it from the damaging effects of sun exposure, while the corrosion-resistant components ensure longevity even in the presence of saltwater. This construction makes it ideal for use on boats where durability is paramount.

Caframo has also incorporated a whisper-quiet motor into the 9206 model, which minimizes noise levels while in operation. This feature allows for comfortable conversations and peaceful ambiance while you enjoy your time on the water, without the distracting hum often associated with standard fans.

The fan is also energy efficient, drawing minimal power from the boat's battery. This is crucial for sailors who rely on limited electrical resources, as it allows for extended use without the fear of draining the battery too quickly. The Caframo 9206 operates efficiently on both 12V and 24V systems, making it adaptable for a variety of marine electrical setups.

In summary, the Caframo 9206 is a standout choice for anyone seeking reliable and efficient airflow on their boat. With adjustable speeds, a swivel base, robust marine construction, quiet operation, and energy efficiency, this fan is designed to provide ultimate comfort in demanding marine environments. Whether you're navigating open waters or relaxing at the dock, the Caframo 9206 ensures a pleasant and refreshing atmosphere.