Panel How it works, Timer/Programmer | Creda NPP150S 75-773013

The Panel - How it works

A heating element within the metal case warms its front face for direct radiation into the room and a gentle circulation of warm air around the room. The built-in thermostat with its adjustment knob located behind the controls door, controls the room temperature by sensing this from the air passing upwards through the panel. The knob selection provides settings from 1 to 6 and each increase in number equates to approximately 7°C temperature difference. Position 1 represents 7°C and would be used for frost protection when the property is not occupied. Position 3 represents 21°C and is the normal comfort position.

NOTE – Should your heater fail to come on when the thermostat knob is at a low setting, this may be due to the temperature of the room being higher than the thermostat setting.

Timer/Programmer

A digital timer/programmer is built into the product and is situated behind the controls door. This will control the operation of the heater for the time periods set at the thermostat setting.

Setting up

If, at any time during setting, a period of approximately 7 seconds passes with no button pressed then the timer reverts to the clock display and saves the settings thus far.

To set the clock, firstly press the left button below where it says “SETUP” on the display. Five options will be displayed on the right side of the display. These are PROG, DOWN, CLOCK, SUMMER and RANDOM. PROG will be flashing at this time. Press the “+” button twice to move the flashing to “CLOCK”, and then press the left button to “AFFIRM” the choice. The hour display will now be flashing and pressing the + or – buttons will set the display to the required setting. Then press the AFFIRM button and the minutes display will be flashing and again the + and – buttons will set the display to the required setting. Press the AFFIRM button and the day display will be flashing and the + and – button will set the day to the required setting. Press the AFFIRM button to end the clock setting and return to the clock display.

To set the Program, firstly press the left button below where it says “SETUP” on the display. Five options will be displayed on the right side of the display. These are PROG, DOWN, CLOCK, SUMMER and RANDOM. PROG will be flashing at this time. Press the AFFIRM button and the 01ON display will be flashing. Press the AFFIRM button and the hour display will flash and be adjustable by the + and – buttons. Pressing AFFIRM will move the display to the minutes, and then to the days. The days have special groupings that can be selected by pressing the + and - buttons. They are

MO TU WE TH FR , SA SU , MO TU WE TH FR SA , MO WE FR , TU TH SA , MO TU WE , TH FR SA , ALL DAYS and individual days. Make your selection and press AFFIRM. The 01ON display will flash. Pressing the + button will advance the display to 01OFF and the same procedure should be followed for setting the OFF time remembering to use the same day selection. The procedure should be followed through to complete your programming requirements up to maximum step 12OFF. Any unwanted steps may be left blank.

Manual Over-rideThe timer can be over-ridden at any time by pressing the right-hand button until the display

shows the required mode ALWAYS ON or ALWAYS OFF. The timer must be returned to the PROG position for the timer and its programs to be active.

Summer Setting

For setting the clock forward 1 hour for summer, press SETUP and select Summer on the

display then press +. To unset the summer setting, repeat the procedure.

Down Timer

The heater can be set to be ON for a fixed time by selecting DOWN from the SETUP screen

and using the + and – buttons to set the required hours. Then press AFFIRM and set the minutes followed by AFFIRM. The heater will then operate until the time expires.

April 2005

577 2003 02A

NP150 75-772903, NP200 75-772904, NP50 75-772901, NPP150 75-773003, NPP100 75-773002 specifications

The Creda NPP series of heating appliances, which includes models NPP50 (75-773001), NP100 (75-772902), NPP50S (75-773011), NPP150 (75-773003), and NPP200 (75-773004), showcases a blend of efficiency, reliability, and modern design. These models are ideal for both domestic and commercial settings, ensuring that spaces are kept warm and comfortable during colder months.

One of the standout features of the NPP series is its advanced heating technology. Each model utilizes an innovative heating element that quickly warms up the room, making it efficient for use in different environments. The rapid heat-up time minimizes waiting, allowing users to enjoy warmth almost instantly. The models are designed with user convenience in mind, featuring simple controls that allow for easy adjustment of settings according to individual preferences.

Energy efficiency is another critical characteristic of the Creda NPP series. These appliances are designed to provide optimal heating while minimizing energy consumption. With rising energy costs, this focus on efficiency not only helps in reducing bills but also contributes to a more sustainable lifestyle. The heaters are built to comply with modern energy standards, ensuring that users are making environmentally conscious choices.

The build quality of the NPP models is robust, featuring a sleek and modern aesthetic that can easily blend into various architectural styles. Durability is ensured through the use of high-grade materials that not only look good but are also built to withstand the test of time. Each model is equipped with safety features, including overheating protection and a stable base, making them safe for use around children and pets.

The range of outputs available, from the compact NPP50 to the powerful NPP200, allows users to select a model that best fits their heating requirements. Whether it’s a small room needing just a bit of warmth or a larger area requiring substantial heating, the NPP series offers versatile solutions.

In summary, the Creda NPP series is a collection of user-friendly, efficient, and stylish heating appliances that cater to a wide range of heating needs. With advanced heating technology, energy efficiency, safety features, and robust design, these models stand out in the competitive home and commercial heating market.