Power Connections, Motor Specifications

POWER CONNECTIONS

A separate electrical circuit should be used for your machines. This circuit should not be less than #12 wire and should be protected with a 20 Amp time lag fuse. If an extension cord is used, use only 3-wire extension cords which have 3- prong grounding type plugs and matching receptacle which will accept the machine’s plug. Before connecting the machine to the power line, make sure the switch (s) is in the “OFF” position and be sure that the electric current is of the same characteristics as indicated on the machine. All line connections should make good contact. Running on low voltage will damage the machine.

DO NOT EXPOSE THE MACHINE TO RAIN OR OPERATE THE MACHINE IN DAMP LOCATIONS.

MOTOR SPECIFICATIONS

Your machine is wired for 120 volts, 60 HZ alternating current. Before connecting the machine to the power source, make sure the switch is in the “OFF” position.

GROUNDING INSTRUCTIONS

THIS MACHINE MUST BE GROUNDED WHILE IN USE TO PROTECT THE OPERATOR FROM ELECTRIC SHOCK.

1. All grounded, cord-connected machines:

In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This machine is equipped with an electric cord having an equipment- grounding conductor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Do not modify the plug provided - if it will not fit the outlet, have the proper outlet installed by a qualified electrician.

Improper connection of the equipment-grounding conductor can result in risk of electric shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment- grounding conductor. If repair or replacement of the electric cord or plug is necessary, do not connect the equipment-grounding conductor to a live terminal.

Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt as to whether the machine is properly grounded.

Use only 3-wire extension cords that have 3-prong grounding type plugs and matching 3-conductor receptacles that accept the machine’s plug, as shown in Fig. A.

Repair or replace damaged or worn cord immediately.

GROUNDED OUTLET BOX

CURRENT

CARRYING

PRONGS

2.Grounded, cord-connected machines intended for use on a supply circuit having a nominal rating less than 150 volts:

If the machine is intended for use on a circuit that has an outlet that looks like the one illustrated in Fig. A, the machine will have a grounding plug that looks like the plug illustrated in Fig. A. A temporary adapter, which looks like the adapter illustrated in Fig. B, may be used to connect this plug to a matching 2-conductor receptacle as shown in Fig. B if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet can be installed by a qualified electrician. The green-colored rigid ear, lug, and the like, extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box. Whenever the adapter is used, it must be held in place with a metal screw.

NOTE: In Canada, the use of a temporary adapter is not permitted by the Canadian Electric Code.

IN ALL CASES, MAKE CERTAIN THE

R E C E P TA C L E I N Q U E S T I O N I S

PROPERLY GROUNDED. IF YOU ARE

NOT SURE, HAVE A QUALIFIED ELEC-

TRICIAN CHECK THE RECEPTACLE.

GROUNDED OUTLET BOX

GROUNDING

MEANS

ADAPTER

GROUNDING BLADE

IS LONGEST OF THE 3 BLADES

Fig. A	4	Fig. B
	4

50-875 specifications

The Delta 50-875 is a prominent model in the realm of woodworking tools, particularly designed for precision cutting and shaping tasks. Known for its robust construction and innovative features, the Delta 50-875 is a favorite among both amateur woodworkers and seasoned professionals.

One of the most notable aspects of the Delta 50-875 is its impressive cutting capacity. The tool is equipped with a 1.5 horsepower motor that delivers powerful performance, enabling it to effortlessly slice through various wood types without sacrificing speed or accuracy. This makes it especially suitable for both softwoods and hardwoods, accommodating a wide range of project requirements.

The Delta 50-875 also boasts a uniquely designed table that provides a stable and spacious work surface. The large cast-iron table is not only durable but also helps minimize vibrations during operation, enhancing overall precision. With an adjustable fence system, users can achieve precise cuts with ease, further emphasizing the tool's capability for accuracy.

Another standout feature of the Delta 50-875 is its advanced dust collection system. Maintaining a clean workspace is crucial in woodworking, and this model excels in that department. The integrated dust port can connect to standard shop vacuums, effectively capturing sawdust and debris as you work, resulting in a healthier and safer working environment.

In addition to its performance and functionality, the Delta 50-875 is designed with user-friendly features that enhance the overall experience. The onboard storage provides easy access to tools and accessories, while the adjustable height and angle settings allow for versatile operation. This adaptability ensures that users can tackle a myriad of woodworking projects with ease.

Durability is another defining characteristic of the Delta 50-875. Its construction utilizes high-quality materials designed to withstand the rigors of continuous use, promising longevity and reliability. Backed by the Delta brand's reputation for quality, this tool is a sound investment for anyone looking to elevate their woodworking skills.

In summary, the Delta 50-875 is an amalgamation of power, precision, and practicality. Its key features, including a powerful motor, spacious cast-iron table, advanced dust collection, and user-friendly design, make it an essential addition to any woodworker's toolkit. Whether embarking on new projects or refining existing skills, the Delta 50-875 stands out as a top-tier choice in the woodworking industry.