Delta 50-875 Unpacking and Cleaning, Assembly, Using the AIR Cleaner on a Bench or Floor Surface

Page 6

UNPACKING AND CLEANING

The Air Cleaner is shipped complete in one shipping container. Carefully unpack the Air Cleaner and all loose items from the shipping container.

Styrofoam blocks have been packed inside the unit for protection. REMOVE THESE BLOCKS (A) Fig. 1 prior to use. To Remove:

1.Disconnect unit from power source.

2.Remove outer filter by lifting up on the bottom and pulling out (Fig. 2A).

3.Remove inner filter by lifting up on the bottom and pulling out (Fig. 2B).

4.Remove styrofoam blocks (A) Fig. 2C and replace filters.

DO NOT LIFT THE AIR CLEANER BY POWER CORD.

A

Fig. 2A

Fig. 2B

Fig. 2C

ASSEMBLY

Determine whether the Air Cleaner will be used on the floor, on a bench, or hanging from an overhead support. If the Air Cleaner will be used as a mobile unit, proceed to “USING THE AIR CLEANER ON A BENCH OR FLOOR SURFACE” section. If the unit will be ceiling-mounted, proceed to section “MOUNTING THE AIR CLEANER TO A

CEILING OR OVERHEAD SUPPORT.”

IMPORTANT: When determining where to mount the air cleaner, always select a location where the air flow is unrestricted. Do not locate the unit in a corner or near any heating or cooling vents.

USING THE AIR CLEANER ON A BENCH OR FLOOR SURFACE

Locate (4) self-adhesive rubber feet (A) Fig. 3 supplied with the unit. Carefully place the Air Cleaner on a firm supporting surface with access to the bottom of the cabinet. Apply a self-adhesive rubber foot (A) Fig. 3 to the bottom at each corner of the air cleaner cabinet. The rubber feet will help eliminate vibration and will prevent the possibility of the air cleaner “walking” across the floor or work surface.

For operator safety, clamp the unit to a work bench or position it securely on sawhorses.

The air cleaner cabinet has convenient lifting handles located on either side (one of which is shown at (A) Fig. 4). To avoid damage to the air filters, carry the air cleaner with the filters positioned away from your body.

A

A

Fig. 3

Fig.4

6

Image 6
Contents Air Cleaner Safety Guidelines Definitions General Safety RulesImportant Safety Instructions Additional Safety Rules For AIR Cleaners Failure to Follow These Rules MAY Result in Serious InjuryPower Connections Motor SpecificationsGrounding Instructions Extension Cords Using the AIR Cleaner on a Bench or Floor Surface Unpacking and CleaningAssembly Do not Lift the AIR Cleaner by Power CordON/OFF Switch Mounting the AIR Cleaner to the Ceiling or Overhead SupportMaintenance Using the Remote ControlOperation Page PARTS, Service or Warranty Assistance AccessoriesCanadian PORTER-CABLE Delta Service Centers

50-875 specifications

The Delta 50-875 is a prominent model in the realm of woodworking tools, particularly designed for precision cutting and shaping tasks. Known for its robust construction and innovative features, the Delta 50-875 is a favorite among both amateur woodworkers and seasoned professionals.

One of the most notable aspects of the Delta 50-875 is its impressive cutting capacity. The tool is equipped with a 1.5 horsepower motor that delivers powerful performance, enabling it to effortlessly slice through various wood types without sacrificing speed or accuracy. This makes it especially suitable for both softwoods and hardwoods, accommodating a wide range of project requirements.

The Delta 50-875 also boasts a uniquely designed table that provides a stable and spacious work surface. The large cast-iron table is not only durable but also helps minimize vibrations during operation, enhancing overall precision. With an adjustable fence system, users can achieve precise cuts with ease, further emphasizing the tool's capability for accuracy.

Another standout feature of the Delta 50-875 is its advanced dust collection system. Maintaining a clean workspace is crucial in woodworking, and this model excels in that department. The integrated dust port can connect to standard shop vacuums, effectively capturing sawdust and debris as you work, resulting in a healthier and safer working environment.

In addition to its performance and functionality, the Delta 50-875 is designed with user-friendly features that enhance the overall experience. The onboard storage provides easy access to tools and accessories, while the adjustable height and angle settings allow for versatile operation. This adaptability ensures that users can tackle a myriad of woodworking projects with ease.

Durability is another defining characteristic of the Delta 50-875. Its construction utilizes high-quality materials designed to withstand the rigors of continuous use, promising longevity and reliability. Backed by the Delta brand's reputation for quality, this tool is a sound investment for anyone looking to elevate their woodworking skills.

In summary, the Delta 50-875 is an amalgamation of power, precision, and practicality. Its key features, including a powerful motor, spacious cast-iron table, advanced dust collection, and user-friendly design, make it an essential addition to any woodworker's toolkit. Whether embarking on new projects or refining existing skills, the Delta 50-875 stands out as a top-tier choice in the woodworking industry.