MTX Audio MXA4002 manual Remote Gain Control, Connecting signal cables to the amplifier

Page 5

4. Remote Gain Control

Included is a remote gain control, which is a volume control that is active with the low pass filter engaged. This control should be mounted near the driver in an easily accessed location. This is not a gain knob, this is a level control. The level control will attenuate the amp or increase its output to the level of the gain setting. It is used to adjust bass output between music sources or tracks(see picture below for connection location).

5. Connecting signal cables to the amplifier

There are two ways to supply the signal to our amplifiers. To get maximum performance, we suggest connecting a high quality RCA to the corresponding outputs at the source unit and inputs of the amplifier. If a source unit is being used without RCA outputs, use the high-level inputs for signal which will turn the amplifier on via our Smart Engage circuitry (Four-channel amps will only engage on the front high-level inputs).

6. Reconnect the battery ground to the vehicle battery

Double check all the previous installation steps. Make certain the wiring and component con- nections are securely attached to the amp +BATT, remote and ground. If everything is in order, complete the installation by reconnecting the battery ground to the vehicle battery.

4

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Page Congratulations IntroductionSpecifications FeaturesConnect the amplifier to the battery InstallationConnect the amplifier remote turn-on Connect the amplifier ground to the vehicle chassisRemote Gain Control Connecting signal cables to the amplifierReconnect the battery ground to the vehicle battery Wiring Diagram Charging System Wiring Diagram 5.1 Surround Sound Example Wiring Diagram Single 4-CHANNEL Amplifier System Wiring Diagram Multi Amplifier System System Tuning Input Gain Adjustment Crossover Section System Tuning Crossover AdjustmentCrossover Frequency Selection Freq Bass Boost Control Bass BoostTrouble Shooting Limited Warranty Conecte el encendido a control remoto al amplificador CaracterísticasConecte el amplificador a la batería Conexión de los cables de señal al amplificador NotaControl remoto de amplificación Sintonización DEL Sistema Ajuste DE Amplificación DE Entrada Sección de crossover Sintonización DEL SistemaSelección de la frecuencia de crossover Freq Control de refuerzo de bajos Bass BoostResolucion DE Problemas Sonido bajo de la radio y el CD Branchez l’amplificateur sur la batterie CaractéristiquesBranchez les câbles de signaux sur l’amplificateur Branchez la mise en marche à distance de l’amplificateurRégulation de gain à distance Réglage DU Système Réglage DU Gain D’ENTRÉE Section de filtre passif Réglage DU Système Réglage DE Filtre PassifSélection de fréquence de filtre passif Freq Réglage des Bass Boost Bass BoostRecherche DES Causes DE Pannes Page Schließen Sie den Verstärker an die Batterie an FeauturesFernbedienungs-Verstärkungsregler Schließen Sie das Signalkabel an den Verstärker anSchließen Sie den Verstärker an die Fernbedienung an Systemeinstellung Anpassung DES Eingangsvertsärkungsreglers Crossover-Bereich Systemeinstellung CROSSOVER-ANPASSUNGAuswahl der Crossover-Frequenz Freq Bass-Boost-Regler Bass BoostProblemlösungen Page Body Copy

MXA4002 specifications

The MTX Audio MXA4002 is a powerful dual-channel amplifier designed specifically for marine and powersports environments. It combines robust performance with durability, making it an essential component for audiophiles who seek high-fidelity sound in challenging conditions.

One of the standout features of the MXA4002 is its waterproof design. The amplifier is built to withstand the rigors of marine and outdoor environments, making it resistant to moisture, salt, and debris. This feature not only enhances longevity, but it also ensures consistent performance regardless of the elements.

With a power output of 400 watts, the MXA4002 delivers substantial power to drive speakers and subwoofers effectively. It operates at a stable 2-ohm impedance, allowing it to produce exceptional sound quality even under heavy loads. This power output translates into clear, dynamic sound across various types of music, from booming bass notes to crisp highs.

The MXA4002 incorporates advanced Class D technology, which offers efficient performance while generating minimal heat. Class D amplifiers are known for their compact size and lightweight design while maintaining high output levels, making the MXA4002 a practical choice for installations where space is limited.

Moreover, this amplifier features variable crossover settings, allowing users to fine-tune the frequency output to match their specific speaker configurations. Whether using it with full-range speakers or subwoofers, the MXA4002 can be adjusted to ensure optimal sound tailored to individual preferences.

Another significant characteristic is its built-in thermal and overload protection. This safeguard prevents the amplifier from overheating or drawing too much current, ensuring it operates safely and efficiently even in demanding situations.

The sleek and rugged design of the MXA4002 also includes a corrosion-resistant finish, which complements its marine application. Its compact dimensions allow for flexible installation options, making it suitable for boats, ATVs, or any powersport vehicle.

In summary, the MTX Audio MXA4002 is an exceptional marine amplifier that combines robust power, advanced technology, and reliable durability. With features like waterproof construction, Class D efficiency, and customizable sound options, it stands out as an ideal choice for those looking to enhance their audio experience in outdoor and challenging conditions.
Top Page Image Contents