•Do not use a cord that shows cracks or abrasion damage along its length or at either end.
•Do not bend the power cord excessively or place heavy articles on it.
•Do not use aerosols near the refrigerator.
-Aerosols used near the refrigerator may cause an
explosion or fire.
•Do not install this appliance in a location where gas may leak.
-This may result in an electric shock or fire.
•The installation or any service of this appliance is recommended by a qualified technician or service company.
-Failing to do so may result in an electric shock, fire,
explosion, problems with the product, or injury.
•This refrigerator must be properly installed and located in accordance with the manual before it is used.
•Connect the power plug in proper position with the cord hanging down.
-If you connect the power plug upside down, wire can get cut off and a cause fire or an electric shock.
•Make sure that the power plug is not squashed or damaged by the back of the refrigerator.
•When moving the refrigerator, be careful not to roll over or damage the power cord.
-This constitutes a fire hazard. •The appliance must be positioned so that the plug is accessible after installation.
• The refrigerator must be grounded.
-You must ground the refrigerator to
-prevent any power leakages or electric shocks caused by current leakage from the
refrigerator.
•Never use gas pipes, telephone lines or other potential lightening rods as ground.
-Improper use of the ground plug can result in an electric shock.
• If the power cord is damaged, have it
Safety information _5
13. 8. 22. |
��
9:10