Setting up
Setting up
| 3. Once the doors are level, turn the | |
| clamping nut (A) counterclockwise | |
A | ( | ) to tighten it. |
NOTE
Adjusting the level when the refrigerator is empty can result in the refrigerator becoming uneven again once items have been placed inside.
If this occurs, adjust the level again.
How to adjust the gap between the refrigerator door and the refrigerator body
If the gap between the refrigerator door and the refrigerator is uneven :
• Use the adjustors located at the top edge of the refrigerator, inside each door.
Adjustor
Locking Nut
1.Open the door where the gap with the refrigerator is narrower and then turn the adjustor counterclockwise ( ) until the gap is even.
2.Once the gap between the door and the refrigerator has been adjusted, turn the adjustor nut clockwise ( ) to lock the adjustor in place.
30 English
2015. 4. 1. |
�� 10:58