select the location where the purifier is to install. (Model with the purifier)
COUPLER (A)
TAP
•If you wish to reassemble the water inlet and outlet sides of the purifier during purifier installation, see the reference illustration.
Line outlet
Side of puri fier
Purifier water
Coupler 90°
Water inlet side of purifier
•Cut the water line attached to the purifier to the appropriate place after measuring the distance between the purifier and the cold water tap.
Setting up
|
|
| CAUTION |
|
| Locking clip | Insert Locking Clip After tube seated |
|
|
| |
Remove any residual matter inside the purifier (model with the purifier) | |||
Outlet side |
| Purifier |
| ||
|
| |
Of purifier |
|
|
|
|
Water line
Water
•Open the main water tap to check whether water is running through the water tube on the water inlet side of the purifier.
•If water does not come out through the line, check whether the tap is open.
•Leave the tap open until clean water is running out and any residual matter that built up during manufacturing has been removed.
NOTE
The initial dark discoloration of water and ice is normal.
English 35
2015. 4. 1. |
��
10:58