Mount Heater to Wall, Baseboard Wiring

Installation Instructions

STEP 1: Mount Heater to Wall

1.Locate wall studs closest to supply wires and position heater (See Figure 1). NOTE: Wire connection is possible from either right or left side of the baseboard heater.

Figure 1
FINISHED	STUDS	SUPPLY
WALL
	FLOOR

2.Remove the wiring compartme nt cover by removing the screw (See Figure 2). The wiring compartme nt is an approved junction box for the baseboard only. No additional junction box is required.

Figure 2

WIRING

COMPARTMENT

COVER

3.Remove the slotted knockout closest to the supply wires and install a strain relief connector (See Figure 3).

Figure 3

4.Pull supply wires through the connector and secure leaving 6 inch wire leads for later use (See Figure 4).

Figure 4

	JUNCTION BOX
SUPPLY
WIRES
GROUND	GROUNDING PIGTAIL
WIRE	WIRE CONNECTOR
	WIRE CONNECTOR

5.Mount the heater securely to the wall with nails or screws going into at least two wall studs (See Figure 5). The back of the heater has “star punch” dimples that allow nails or screws to easily pierce the sheet metal.

Figure 5	STUDS	MOUNT
		SECURELY
		TO WALL

WIRING

COMPARTMENT COVER

NOTE: You do not need to disassemble any additional parts to mount the heater.

STEP 2: Baseboard Wiring

1.Verify the electrical supply wires are the same voltage as the heater. Check heater specifications to ensure correct wiring. Failure to do so may destroy the heater and void your warranty.

Both 120 volt and 240 volt baseboard wiring utilize 3 supply wires.

120 volt baseboard wiring: 1 hot, 1 neutral and 1 ground

240 volt baseboard wiring: 2 hot and 1 ground. No neutral needed.

For all baseboard wiring applications, both supply wires must be connected to at least one (1) heater wire.

2.Connect the grounding lead to the grounding pigtail (copper wire) with a connector (See Figure 4). It may be necessary to move ground lead to the side you are wiring.

3.Disconnect one factory connector (See Figure 6. Model 8F2025 see Figure 7). If wiring on the left side, disconnect factory connector A. If wiring on the right side, disconnect factory connector B.

NOTE: There are no loose wires provided with the baseboard. This is due to the ability to wire the baseboard on either the right or left side of the heater.

A		B Figure 6
A

DO NOT DISCONNECT	GROUND


A	B	Figure 7
	B	Model
		Model
		8F2025
		Only

DO NOT DISCONNECT

GROUND

4. Proceed to the next step.

8F2025, 2F500-8, 10F2500, 8F2500, 8F2500-8 specifications

Cadet 6F1500, 6F1500-8, 3F750, 3F750-8, and 4F1000 are part of an innovative lineup of advanced technologies designed to transform various sectors, particularly in automation, robotics, and control systems. Each model brings a unique set of features and characteristics aimed at enhancing efficiency, precision, and user-friendliness.

The Cadet 6F1500 is an exemplary model known for its robust performance and versatility. It is designed with a powerful processor and adaptable operation modes that cater to a wide range of applications. Its main features include enhanced sensor compatibility, which allows for real-time data acquisition and analysis. The 6F1500 is particularly favored in environments that require rigorous control and monitoring, providing operators with accurate feedback and comprehensive insights.

Building on the foundation of the 6F1500, the 6F1500-8 variant introduces additional capabilities. This model not only supports advanced communication protocols but also integrates seamlessly with IoT devices, enabling remote monitoring and management. Its expanded memory and processing power further enhance its ability to handle complex tasks, making it ideal for larger projects requiring synchronization across multiple units.

The 3F750 and 3F750-8 models are designed with a focus on mobility and ease of use. They are compact yet powerful, perfect for applications where space is a constraint. The 3F750 boasts an intuitive interface and simplified controls that make it accessible to users with varying levels of expertise. The upgraded 3F750-8 version enhances connectivity options, allowing for multi-device integration and collaboration. Both models prioritize energy efficiency, featuring smart power management systems that optimize performance while reducing operational costs.

Finally, the Cadet 4F1000 stands out with its emphasis on high-speed processing and precision control. It features cutting-edge algorithms that ensure rapid response times, making it suitable for high-demand scenarios such as manufacturing lines and high-frequency trading ecosystems. The integration of AI-driven analytics allows for predictive maintenance and automated decision-making processes, significantly minimizing downtime.

In summary, the Cadet series - including the 6F1500, 6F1500-8, 3F750, 3F750-8, and 4F1000 - showcases a blend of advanced technology, versatility, and user-oriented design. With a focus on automation and integration, these models set a new standard in their respective fields, driving innovation and operational excellence.