Using voice prompts, Changing the language

Using the headset

Using voice prompts

Voice prompts inform you about the current status of the headset and usage informations. If you cannot hear any voice prompts, make sure the voice prompt feature is turned on.

Turning the voice prompts on or off

•In Pairing mode, press and hold the Volume up button for 3 seconds to turn the voice prompts on. You will hear “Voice prompt is on”.

•In Pairing mode, press and hold the Volume down button for 3 seconds to turn the voice prompts off. You will hear “Voice prompt is off”.

Changing the language

In Pairing mode, press and hold both Volume buttons at the same time to select a language. Supported languages may vary depending on the region in which it was purchased.

List of voice prompts

	Status	Voice prompt*
	When you turn the	“Power on” or “Power off”
	headset on or off	“Power on” or “Power off”
	headset on or off
	When you enter	“Ready to pair. Search for the headset from the Bluetooth menu”
	Pairing mode
	Pairing mode

	When you turn the
	Multi-point feature on	“Multi-point mode is on” or “Multi-point mode is off”
	or off

	When you connect the	“Device is connected” or “Two devices are connected”
	headset to the devices	“Device is connected” or “Two devices are connected”
	headset to the devices

	When you disconnect
	the headset from a	“Device is disconnected”
	device

	When you reject or end	“Call terminated”
	a call	“Call terminated”
	a call

* Voice prompt content may vary.