Desa Tech SL30NT installation manual Top

Page 18

VENT-FREE NATURAL GAS STOVE HEATER

TROUBLESHOOTING

Continued

WARNING: If you smell gas

•Shut off gas supply.

•Do not try to light any appliance.

•Do not touch any electrical switch; do not use any phone in your building.

•Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

•If you cannot reach your gas supplier, call the fire department.

IMPORTANT: Operating heater where impurities in air exist may create odors. Cleaning supplies, paint, paint remover, cigarette smoke, cements and glues, new carpet or textiles, etc., create fumes. These fumes may mix with combustion air and create odors. These odors will disappear over time.

OBSERVED PROBLEM

POSSIBLE CAUSE

REMEDY

Heater produces a clicking/ticking noise just after burner is lit or shut off

1.Metal expanding while heating or con- tracting while cooling

1.This is common with most heaters. If noise is excessive, contact qualified ser- vice person

Heater produces unwanted odors

1.

Heater burning vapors from paint, hair

 

 

spray, glues, cleaners, chemicals, new

 

 

carpet, etc. (See IMPORTANT state-

 

 

ment above)

 

2.

Gas leak. See Warning statement at

 

 

top of page

1.Open window and ventilate room. Stop using odor causing products while heater is running

2.Locate and correct all leaks (see Check- ing Gas Connections, page 12)

Heater shuts off in use (ODS operates)

1.

Not enough fresh air is available

 

2.

Low line pressure

 

3.

ODS/pilot is partially clogged

1.Open window and/or door for ventilation

2.Contact local natural gas company

3.Clean ODS/pilot (see Cleaning and Maintenance, page 15)

Gas odor even when control knob is in OFF position

1.Gas leak. See Warning statement at top of page

2.Control valve defective

1.Locate and correct all leaks (see Check- ing Gas Connections, page 12)

2.Replace control valve

Gas odor during combustion

1.

Foreign matter between control valve

 

 

and burner

 

2.

Gas leak. See Warning statement at

 

 

top of page

1.Take apart gas tubing and remove for- eign matter

2.Locate and correct all leaks (see Check- ing Gas Connections, page 12)

www.desatech.com

18

104463

Page 17 Page 19
Image 18
Page 17 Page 19
Contents OWNER’S Operation and Installation Manual What to do if YOU Smell GASSafety Information VENT-FREE Natural GAS Stove HeaterLocal Codes Product Identification Product FeaturesSafety Pilot OperationUnusually Tight Construction AIR for Combustion and VentilationProviding Adequate Ventilation Confined and Unconfined SpaceAIR for Combustion Ventilation Determining FRESH-AIR Flow for Heater LocationDetermining if You Have a Confined or Unconfined Space Building Ventilation AIRVentilation Air From Inside Ventilation Air From OutdoorsClearances to InstallationCheck GAS Type Combustibles Vent-Free Operation OnlyStove Cavity Assembly Stove bottom Legs Amity models include leg leveler boltsBack panel see Installing Gas Log Installing GAS LOG Heater Into Stove Washers to reattach back panel laterConnecting to GAS Supply Installation Items NeededPressure Testing Gas Supply Piping System Pressure Testing Heater Gas ConnectionsChecking GAS Connections Lighting Instructions For Your Safety Read Before LightingOperating Heater To Turn OFF GAS To ApplianceTechnical Service SpecificationsService Hints Inspecting BurnersLogs Cleaning and MaintenanceCleaning Burner Injector Holder and Pilot AIR Inlet Hole Main BurnerTroubleshooting Observed Problem Possible CauseObserved Problem Possible Cause Remedy Maintenance,Top Parts Centrals AccessoriesCleaning KIT CCK Equipment Shutoff Valve GA5010Illustrated Parts Breakdown SL30NTParts List KEY Part Description QTYCisc Cisg Included In Hardware Kit Warranty Information

SL30NT specifications

Desa Tech SL30NT is an advanced and efficient machine designed for various industrial applications. Its robust construction and innovative technology make it a reliable choice for businesses looking to enhance their production capabilities. This model stands out due to its combination of power, precision, and versatility.

One of the main features of the SL30NT is its high-performance engine. The machine is equipped with a powerful motor that delivers exceptional torque and speed, allowing it to handle a wide range of tasks with ease. This makes it suitable for both heavy-duty applications and more intricate tasks that require a delicate touch.

Another significant characteristic of the SL30NT is its advanced control system. The machine features a user-friendly interface that allows operators to easily manage settings and monitor performance in real-time. This technological advancement not only enhances efficiency but also reduces the likelihood of errors during operation. With programmable settings and customization options, users can optimize the machine for specific processes.

The SL30NT also incorporates modern safety features, ensuring that operators can work confidently and securely. Emergency stop buttons, safety guards, and advanced sensors help to prevent accidents and protect both personnel and equipment. This emphasis on safety is crucial in industrial environments where the risk of injury is inherent.

In terms of technology, the SL30NT boasts an integrated automation system. This feature streamlines workflow by enabling the machine to perform tasks with minimal human intervention. Automation not only improves productivity but also ensures consistent quality in the output. The machine's ability to integrate with other systems and software further enhances its functionality, making it a valuable asset for any production line.

Additionally, the SL30NT is built with durability in mind. Its construction uses high-quality materials that withstand the rigors of industrial use, ensuring a long service life. Regular maintenance is facilitated by the machine’s design, allowing for easy access to components that require servicing.

In summary, the Desa Tech SL30NT is a state-of-the-art machine that excels in performance, safety, and versatility. Its advanced features and technology make it an indispensable tool for businesses aiming for operational excellence. Whether in manufacturing, assembly, or other industrial applications, the SL30NT promises reliability and efficiency, marking it as a leader in its class.
Top Page Image Contents