INSTALLING YOUR MICROWAVE OVEN
Place the oven on a flat level surface 85 cm above the floor. The surface should be strong enough to safely bear the weight of the oven.
1. | When you install your oven, make sure there is | 20 cm | 10 cm | |
| adequate ventilation for your oven by leaving at least | above | behind | |
ENGLISH | 10 cm (4 inches) of space behind and, on the sides |
|
| |
of the oven and 20 cm (8 inches) of space above. | 85 cm of | 10 cm on | ||
| ||||
|
| |||
|
| the floor | the side |
2.Remove all packing materials inside the oven. Install the roller ring and turntable.
Check that the turntable rotates freely.
3.This microwave oven has to be positioned so that plug is accessible.
If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.
For your personal safety, plug the cable into a
Do not install the microwave oven in hot or damp surroundings like next to a traditional oven or radiator. The power supply specifications of the oven must be respected and any extension cable used must be of the same standard as the power cable supplied with the oven. Wipe the interior and the door seal with a damp cloth before using your microwave oven for the first time.
SETTING THE TIME
Your microwave oven has an inbuilt clock. When power is supplied, “12:00” is automatically displayed on the display.
Please set the current time. The time can be displayed in either the
•When you first install your microwave oven
•After a power failure
Do not forget to reset the clock when you switch to and from summer and winter time.
1. To display the time in | Then press the |
the... | Clock ( ) button... |
Once | |
Twice |
2.Set the hour with the h button and the minutes with
the min button.
3.When the right time is displayed, press the Clock (
)
button again to start the clock.
Result : The time is displayed whenever you are not using the microwave oven.
12