Desa CGN10RL installation manual Operating Heater, For Your Safety Read Before Lighting

Page 10

GAS RESIDENTIAL HEATERS

OPERATING

HEATER

FOR YOUR SAFETY

READ BEFORE

LIGHTING

WARNING: If you do not fol- low these instructions exactly, a fire or explosion may result caus- ing property damage, personal injury or loss of life.

A.This appliance has a pilot which must be lighted by hand. When lighting the pilot, follow these instructions exactly.

B.BEFORE LIGHTING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS

•Do not try to light any appliance.

•Do not touch any electric switch; do not use any phone in your building.

•Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

•If you cannot reach your gas supplier, call the fire department.

C.Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, don’t try to repair it, call a qualified service technician or gas supplier. Force or attempted repair may result in a fire or explosion.

D.Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

LIGHTING

INSTRUCTIONS

1.STOP! Read the safety information above.

2.Make sure manual shutoff valve is fully open.

3.Turn control knob clockwise to the OFF position.

Piezo Ignitor Button

Control Knob

 

PILOT

OFF

 

IGNITOR LOW

HIGH

Figure 15 - Control Knob In The OFF Position

4.Wait five (5) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas, STOP! Follow “B” in the safety information. If you don’t smell gas, go to the next step.

5.Press in control knob, and turn

counterclockwise to pilot position. Keep control knob pressed for five seconds.

Note: You may be running this heater for the first time after hooking up to gas supply. If so, the control knob may need to be pressed in for 30 seconds. This will allow air to bleed from the gas system.

•If control knob does not pop up when released, contact a qualified service person or gas supplier for repairs.

6.With control knob pressed in, push down and release ignitor button. This will light pilot. The pilot is attached to the front of burner. If needed, keep pressing ignitor button until pilot lights.

Note: If pilot does not light, refer to Trouble Shooting, pages 12 through 14. Also contact a qualified service person or gas supplier for repairs. Until repairs are made, light pilot with match, see Manual Lighting Procedure, page 11.

Ignitor Electrode

Pilot Burner

Thermocouple

Figure 16 - Pilot

7.Keep control knob pressed in for 10 seconds after lighting pilot. After 10 seconds, release control knob.

Note: If pilot goes out, repeat steps 3 through 7.

TO SELECT

HEATING LEVEL

WARNING: When running heater, set control knob at LOW or HIGH locked positions. Never set control knob between locked positions. Poor combustion and higher levels of carbon monox- ide may result.

CAUTION: Do not try to adjust heating levels by using the manual shutoff valve.

1.Slightly press in control knob and

turn counterclockwise to the LOW or HIGH positions.

IMPORTANT: Release downward pressure while turning control knob. Control knob will lock at the desired position.

10

103549

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Infrared VENT-FREE Natural GAS Heater What to do if YOU Smell GASLocal Codes Safety InformationProduct Features UnpackingUnusually Tight Construction Product IdentificationAIR for Combustion and Ventilation Providing Adequate VentilationDetermining AIR Flow for Heater Location AIR for Combustion VentilationDetermining if You Have a Confined or Unconfined Space Ventilation Air From Inside Building Ventilation AIRVentilation Air From Outdoors Check GAS Type Installing to WallInstallation Items Locating HeaterInstalling Heater to Wall Connecting to GAS Supply NPT Plug TapChecking GAS Connections Pressure Testing Heater GAS ConnectionsPressure Testing GAS Supply Piping System PsigFor Your Safety Read Before Lighting Operating HeaterPilot Flame Pattern Inspecting BurnerBurner Flame Pattern Shutting Off HeaterTroubleshooting SpecificationsAccessory Observed Problem Possible CauseTurn control knob until it locks at desired Observed Problem Possible Cause Remedy Technical ServiceService Hints When gas pressure is too low When gas quality is badReplacement Parts Cleaning and MaintenanceService Publications Parts Centrals Illustrated Parts Breakdown CGN10R CGN10RL Parts List CGN10R CGN10RL KEY Part Number Description QTYGAS Residential Heaters 103549 Warranty Information

CGN10RL specifications

Desa CGN10RL is a state-of-the-art gas-powered generator designed for both residential and commercial applications, offering reliability and efficiency. With a robust 10,000-watt peak output and a continuous output of 8,000 watts, this generator ensures that users can power essential appliances and tools with ease, making it an ideal choice for home emergency power, outdoor activities, and job sites.

One of the main features of the Desa CGN10RL is its powerful engine, which is designed for durability and long life. The generator utilizes a 420cc engine that is specifically engineered to provide high performance under various conditions. This engine is equipped with an automatic voltage regulator that ensures stable output, protecting connected devices from voltage fluctuations. The recoil start system provides quick and reliable starting, even in cold weather.

The CGN10RL incorporates advanced noise reduction technologies, allowing for quieter operation compared to standard generators. This is particularly beneficial in residential areas or during nighttime use, where noise levels can be a concern. The design includes a soundproofing casing that minimizes noise output while maintaining excellent ventilation for cooling.

In terms of fuel efficiency, the Desa CGN10RL has a large fuel tank capacity of 7 gallons, which provides extended run times of up to 12 hours at half load. This means less frequent refueling, which is a significant advantage for users who need sustained power for extended periods. The generator is designed to run on standard propane or natural gas, giving users flexibility in fuel choices.

The generator is also equipped with multiple outlets, including 120V and 240V options, enabling users to connect various devices simultaneously. The inclusion of a 12V DC outlet adds versatility, allowing it to charge batteries and small electronics. Furthermore, the CGN10RL features built-in circuit breakers that protect against overloads, enhancing safety for users.

Portability is another key characteristic of the Desa CGN10RL. It comes with heavy-duty wheels and a comfortable handle, making transportation to different locations effortless. Its compact design allows for easy storage when not in use.

In summary, the Desa CGN10RL generator stands out with its powerful engine, advanced noise reduction, impressive fuel efficiency, versatile output options, and portability. These features make it a reliable choice for users looking for a high-quality generator that can handle a variety of applications while maintaining ease of use and safety.
Top Page Image Contents