Desa VS24NR VS30NR, CFS18NR, VS18NR installation manual Shows Temperature Setting

Page 16

DESA INTERNATIONAL

UNVENTED NATURAL GAS LOG HEATER

OPERATING

HEATER

Continued

3.Use the STATUS button on the hand- held remote control unit to see the operation mode being used and the temperature setting selected. A red light will come on beside the opera- tion mode being used when the sta- tus button is pressed.

4.To turn the burners off when oper- ating in the manual mode, press the OFF button. If operating in the auto mode, press the MAN button, then press the OFF button. The pilot will remain lit.

IMPORTANT: To turn the pilot off, manually turn the control knob on the heater to the OFF position.

Control Knob in

Flame Adjustment Knob

On Position

N

O

T OLIP

F

F

O

O

HI

L

ON

OFF REMOTE

Selector Switch in

Remote Position

Figure 23 - Setting the Selector Switch, Control Knob, and Flame Adjustment Knob for Remote Operation

 

 

HI

Shows Temperature Setting

 

 

 

 

TEMP

Allows Burners to be Turned

 

 

On and Off with the Hand-

 

 

Held Remote Unit.

MAN

LO ON

The log heater will

AUTO

OFF

 

 

automatically cycle between

 

 

pilot and the heat setting that

 

STATUS

has been selected.

 

 

Increases Room Temperature

Decreases Room Temperature

Turns Burners On and Off

Shows Current Operation Mode

Figure 24 - Thermostat Hand-Held Remote Control Unit Selections (GHRCT only)

16

103449

Image 16
Contents OWNER’S Operation and Installation Manual What to do if YOU Smell GASSafety Information Desa International Unvented Natural GAS LOG HeaterProduct Features Remote Control AccessoriesProduct Identification Local CodesAIR for Combustion and Ventilation Providing Adequate VentilationUnusually Tight Construction Confined and Unconfined SpaceDetermining FRESH-AIR Flow for Heater Location AIR for Combustion VentilationDetermining if You Have a Confined or Unconfined Space Ventilation AIR Ventilation Air From InsideBuilding Ventilation Air From OutdoorsInstallation Installation ClearancesCheck GAS Type Minimum Fireplace Clearance to Combustible MaterialsIf Using Mantel If Not Using MantelMinimum Noncombustible Material Clearances Operation,Determining Minimum Mantel Clearance When Using a Hood Mantel ClearancesFloor Clearances Determining Minimum Mantel ClearancesInstalling Damper Clamp Accessory for Vented Operation Installing Heater Base AssemblyInstallation Items Needed Chimney Minimum Permanent Height ft Flue Opening sq. insConnecting to GAS Supply Attaching Flexible Gas Hose to Heater Gas RegulatorPressure Testing Heater Gas Connections Pressure Testing gas Supply Piping systemChecking GAS Connections Test Pressures Equal To or Less Than 1/2 PsigInstalling Logs Installing Front Logs #1L and #1ROperating Heater For Your Safety Read Before LightingLighting Instructions To Turn OFF GAS to Appliance Manual Lighting ProcedureOptional Remote Operation Shows Temperature Setting Pilot Flame Pattern Inspecting BurnersFront Burner Flame Pattern Cleaning Burner Injector Holder and Pilot AIR Inlet Hole Cleaning and MaintenanceLogs Troubleshooting Observed Problem Possible Cause RemedySee Wiring Diagram, Gas leak. See Warning statement AboveSpecifications Wiring Diagram Replacement PartsService Hints Technical ServiceAccessories Illustrated Parts Breakdown Variable Control CFS18NR VS18NR VS24NR VS30NRParts List CFS18NR VS18NR VS24NR VS30NRWarranty Information International