OWNER’S MANUAL
PRODUCT
IDENTIFICATION
Hot Air Outlet | Outer Shell |
(Front) |
|
Handle
Motor
Piezo Ignitor
Button
Automatic Control | Power Cord |
Valve Button |
|
Hose/Regulator
Assembly
Figure 1 - 30,000 BTU/Hr Model
UNPACKING
1.Remove all packing items applied to heater for shipment. Keep plastic cover caps (attached to inlet connector and hose/regulator assembly) for storage.
2.Remove all items from carton.
3.Check all items for shipping damage. If heater is damaged, promptly inform dealer where you bought heater.
FUNDAMENTALS OF OPERATION
The Fuel System: The hose/regulator assembly attaches to the propane gas sup- ply. This provides fuel to the heater.
The Air System: The motor turns the fan. The fan pushes air into and around the combustion chamber. This air is heated and provides a stream of clean, hot air.
The Ignition System: The piezo ignitor lights the burner.
The Automatic Control System: This system causes the heater to shut down if the flame goes out.
| Fan | Motor |
Clean |
|
|
Heated |
|
|
Air Out |
|
|
(Front) |
| Cool Air |
|
| |
|
| In (Back) |
Combustion |
| Hose/ |
| Regulator | |
Chamber |
| |
| Assembly | |
|
| |
Air For Combustion | Air For Heating | |
Figure 2 - Cross Section Operational View |
|
|
104163 | 3 |