Desa MPF18VPA Placement of Loose Embers, Test Pressures Equal To or Less Than 1/2 Psig 3.5 kPa

Page 9

INSTALLATION

Continued

5.Correct all leaks at once.

6.Reconnect heater and equipment shutoff valve to gas supply. Check reconnected fit- tings for leaks.

Test Pressures Equal To or Less Than 1/2 PSIG (3.5 kPa)

1.Close equipment shutoff valve (see Figure 8).

2.Pressurize supply piping system by either opening propane/LP supply tank valve for propane/LP gas or opening main gas valve located on or near gas meter for natural gas or using compressed air.

Pressure Testing Appliance Gas Connections

1.Open equipment shutoff valve (see Figure 8).

2.Open main gas valve located on or near gas meter for natural gas or open propane/LP supply tank valve.

3.Make sure control knob of appliance is in the OFF position.

4.Check all joints from equipment shutoff valve to gas control (see Figure 9 or 10). Apply noncorrosive leak detection fluid to all joints. Bubbles forming show a leak.

5.Correct all leaks at once.

6.Light appliance (see Operating Appliance, page 10) Check all other internal joints for leaks.

3.

Check all joints from gas meter to equipment

7.

Turn off appliance.

 

shutoff valve for natural gas or propane/LP

PLACEMENT OF LOOSE EMBERS

 

supply to equipment shutoff valve for propane/

 

 

 

 

LP (see Figure 9 or 10). Apply noncorrosive

 

 

 

leak detection fluid to all joints. Bubbles form-

 

CAUTION: Do not place

 

ing show a leak.

 

any loose embers around pilot

 

Equipment

Open

 

assembly.

 

Shutoff

 

 

 

 

Valve

 

Two bags of loose embers are provided with this

 

 

 

unit. For this installation use the embers that are

 

 

Closed

approximately 1" square in size. If needed, larger

 

Figure 8 - Equipment Shutoff Valve

embers can be broken to size. These embers aid in

 

concealing the burner pan, directing flames through

 

 

 

Propane/LP

Equipment

the ember bed, quiet operation of the unit and gives

Supply Tank

Shutoff Valve

a natural random flame pattern.

 

 

 

Place embers as follows:

 

 

 

1.

Place embers around the center ember bed or

 

 

 

 

ember pod.

 

 

 

2.

Place individual embers on their edge (not flat)

 

 

 

 

along the top of the burner pan. This aids in di-

 

 

 

 

recting flames from the burner through the ember

 

 

 

 

bed. Note: Too many embers or embers placed

 

 

Control Valve

 

flat along burner pan can suppress the flames.

 

 

 

 

 

 

Location

3.

When unit is lit, check flames for random appear-

 

Figure 9 - Checking Gas Joints

 

ance and ember bed glowing red-orange in color

 

(Propane/LP Gas Only)

 

(see Burner Flame Pattern, page 11). If this is

 

 

not happening, either add, remove or reposition

 

 

Equipment

 

 

 

 

loose embers. IMPORTANT: Turn unit off and

 

 

Shutoff Valve

 

 

 

 

let cool before repositioning loose embers.

 

 

 

 

Gas Meter

Control Valve Location

Figure 11 - Placement of Embers

Figure 10 - Checking Gas Joints

(Natural Gas Only)

114925-01C

www.desatech.com

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents MPF24VNA, MPF24VPA MPF18VNA and MPF18VPA What to do if YOU Smell GASTable of Contents Safety Information Local Codes High traffic areas Windy or drafty areasProvide adequate clearances around air openings Installation Product FeaturesRemove log set assembly from carton Product IdentificationFlue Opening Specifications Installation and ClearancesVenting Specifications for InstallationInstalling Appliance Connecting to GAS SupplyInstallation Items Needed Checking GAS Connections Test Pressures In Excess Of 1/2 Psig 3.5 kPaNatural From Gas Meter 5 W.C.** to 10.5 W.C. Pressure Placement of Loose Embers Pressure Testing Appliance Gas ConnectionsTest Pressures Equal To or Less Than 1/2 Psig 3.5 kPa Operating Appliance Pilot Flame Pattern Inspecting BurnersON/OFF Series Model HRC100 Check pilot flame pattern and burner flame pat- terns oftenCleaning Maintenance Service HintsTechnical Service Replacement PartsObserved Problem Possible Cause Remedy TroubleshootingPilot is lit Burner orifices clogged Propane/LP gas company Contact local natural orReplace burner orifices Replace burner orificeCleaners or similar products Burners are lit Position when burners areGas regulator defective Control valve defective Check manifold pressureGas leak. See Warning Statement at topGas leak. See Warning statement at top Specifications AccessoriesWiring Diagram MPF24VNA, MPF24VPA MPF18VNA, MPF18VPA Illustrated Parts BreakdownParts List Warranty Information Keep this WarrantyLimited Warranty Vented GAS LOG Appliances

MPF18VNA, MPF24VPA, MPF18VPA specifications

The Desa MPF24VPA, MPF18VPA, and MPF18VNA are innovative models designed for efficient heating solutions tailored to a variety of residential and commercial applications. These products showcase advanced technology and engineering that cater to diverse consumer needs, making them notable players in the heating equipment market.

One of the defining features of the Desa MPF series is their high heating capacity. The MPF24VPA, for instance, can deliver a robust output suitable for larger spaces, while the MPF18VPA and MPF18VNA offer slightly lower capacities, making them ideal for smaller areas. This range allows consumers to choose models according to the specific requirements of their environments.

Energy efficiency is another hallmark of the Desa MPF series. These models incorporate state-of-the-art combustion technology, ensuring maximum fuel utilization and reduced emissions. With features such as automatic ignition and efficient heat exchangers, users can expect quick heat responses and consistent comfort without wasting energy, contributing to lower utility bills.

Durability and user-friendly operation are also significant characteristics of the MPF24VPA, MPF18VPA, and MPF18VNA. Constructed with high-quality materials and components, these heaters are built to withstand the rigors of regular use. Moreover, the intuitive controls make operation straightforward, allowing users to easily adjust settings to suit their needs.

Safety is always a top priority in any heating appliance, and Desa takes this aspect seriously. The MPF series includes several safety features, such as automatic shut-off in case of overheating, low oxygen sensors, and robust construction that prevents overheating and accidental damage. These precautions ensure that consumers can enjoy their heating solutions confidently.

Additionally, the MPF series features versatile installation options. The models can be configured for vented or vent-free operation, providing flexibility based on local regulations or personal preferences. Their sleek designs are also aesthetically pleasing, allowing them to blend seamlessly into various home or office environments.

In conclusion, the Desa MPF24VPA, MPF18VPA, and MPF18VNA are exemplary heating units that combine efficiency, effectiveness, and safety. With diverse features and options designed to cater to a wide audience, these models stand out as reliable choices for anyone looking for high-quality heating solutions. Whether for a cozy home or a bustling commercial space, the Desa MPF series is engineered to deliver warmth and comfort through innovative design and technology.
Top Page Image Contents