Desa MPF24VNA installation manual Operating Appliance

Page 10

OPERATING APPLIANCE

FOR YOUR SAFETY

READ BEFORE LIGHTING

WARNING: Keep flue open when operating unit.

WARNING: If you do not fol- low these instructions exactly, a fire or explosion may result causing property damage, per- sonal injury or loss of life.

A.This appliance has a pilot which must be lighted with a piezo ignitor. When lightning the pilot, follow these instructions exactly.

B.BEFORE LIGHTING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS

Do not try to light any appliance.

Do not touch any electric switch; do not use any phone in your building.

Immediately call your gas supplier from a neighborʼs phone. Follow the gas supplierʼs instructions.

If you cannot reach your gas supplier, call the fire department.

C.Use only your hand to push in or turn gas control knob. Never use tools. If the knob will not push in or turn by hand, do not try to repair it, call a qualified technician. Force or attempted repair may result in a fire.

D.Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

LIGHTING

INSTRUCTIONS

1.STOP! Read the safety information, above.

2.Make sure switch is in OFF position.

3.Be sure gas line shut-off valve is OPEN.

4.Press in and turn control knob clockwise to the OFF position (see Figure 12). Note: Knob cannot be turned from PILOT to OFF unless knob is pushed in slightly. DO NOT FORCE.

5.Wait five (5) minutes to clear out any gas. If you then smell gas, STOP! Follow "B" in the safety information in column 1. If you don't smell gas, go on the next step.

6.Press in and turn control knob counter-

clockwise to the PILOT position. Press in control knob for five (5) seconds (see Figure 12).

7.With control knob pressed in, press and release ignitor button. This will light pilot. If needed, keep pressing ignitor button until pilot lights. Note: If pilot does not stay lit, contact a qualified service person or gas supplier for repairs.

8.Keep control knob pressed in for 30 seconds after lighting pilot. After 30 seconds, release control knob.

If control knob does not pop out when released, contact a qualified service person or gas supplier for repairs.

Note: If pilot goes out, repeat steps 4 through 8.

9.Slightly push in and turn control knob coun-

terclockwise to the ON position.

10.Wait one minute and move switch to the ON position to light burner. Note: AUTO is only functional when using optional remote control accessory.

11.Set flame adjustment knob to any level between HI and LO.

Control

 

Knob

 

Piezo Ignitor

Flame Adjustment Knob

 

Figure 12 - Setting Control Knobs

TO TURN OFF GAS

TO APPLIANCE

1.Push switch into OFF position. The pilot will remain lit for normal service.

2.Access control knobs.

3.Depress gas control knob slightly and turn clockwise to OFF. Do not force.

OPTIONAL HAND-HELD

REMOTE OPERATION

Note: Remote control accessory must be pur- chased separately (see Accessories, page 17). Follow instructions included with the remote control.

10

www.desatech.com

114925-01B

Image 10
Contents What to do if YOU Smell GAS MPF24VNA, MPF24VPA MPF18VNA and MPF18VPATable of Contents Safety Information Local Codes High traffic areas Windy or drafty areasInstallation Product FeaturesProduct Identification Venting Specifications for Installation and ClearancesFlue Opening Specifications InstallationConnecting to GAS Supply Installing ApplianceInstallation Items Needed Natural From Gas Meter 5 W.C.** to 10.5 W.C. Pressure Checking GAS ConnectionsTest Pressures In Excess Of 1/2 Psig 3.5 kPa Propane/LPPressure Testing Appliance Gas Connections Placement of Loose EmbersTest Pressures Equal To or Less Than 1/2 Psig 3.5 kPa Operating Appliance Pilot Flame Pattern Inspecting BurnersON/OFF Series Model Ghrcb Technical Service Service HintsCleaning Maintenance Replacement PartsTroubleshooting Observed Problem Possible Cause RemedySee Wiring Diagram, Maintenance, Statement at top Gas leak. See WarningGas leak. See Warning statement at top Accessories SpecificationsWiring Diagram Illustrated Parts Breakdown MPF24VNA, MPF24VPA MPF18VNA, MPF18VPAParts List Keep this Warranty Warranty InformationLimited Warranty Vented GAS LOG Appliances

MPF24VNA specifications

Desa MPF24VNA is a high-performance, versatile appliance designed to meet the demands of modern heating solutions. This innovative product stands out due to its advanced features, making it an excellent choice for both residential and commercial applications.

One of the key characteristics of the Desa MPF24VNA is its energy efficiency. With a heating capacity of up to 24,000 BTUs, it can effectively warm spaces while using minimal energy, which is crucial for reducing heating costs. The unit is designed with a focus on environmentally friendly operation, helping users to lower their carbon footprint while still enjoying optimal comfort.

The technology employed in the Desa MPF24VNA is remarkable. It features a powerful, quiet fan system that ensures even heat distribution, eliminating cold spots in the room. This fan operates on multiple speeds, allowing users to tailor the airflow to their specific needs. Furthermore, the unit is equipped with a digital thermostat that provides precise temperature control, enabling users to set their desired comfort level with ease.

Another important feature is the user-friendly interface. The Desa MPF24VNA comes with a remote control, allowing users to adjust settings from a distance. This convenience is particularly beneficial in larger spaces where the heater may not be easily accessible. The programmable settings also help users to create heating schedules that align with their routines, further enhancing energy efficiency.

The design of the Desa MPF24VNA is both stylish and functional. Its sleek appearance allows it to blend seamlessly into various interior decors, making it an attractive heating solution for any space. Built with high-quality materials, the unit is not only durable but also designed for easy maintenance. The air filter is easily accessible and can be cleaned or replaced without hassle, ensuring that the heater operates at peak performance.

Safety is another priority with the Desa MPF24VNA. It includes several safety features such as an automatic shut-off function in case of overheating and a tip-over switch that turns the heater off if it is knocked over. This ensures peace of mind for users, especially in households with children or pets.

In conclusion, the Desa MPF24VNA is a top-tier heating appliance that combines efficiency, technology, and safety for optimal performance. Its versatile features make it an ideal choice for anyone looking to enhance their heating solutions while maintaining a focus on sustainability and comfort.