Desa ROPANE CONSTRUCTION HEATERS owner manual Operation Storage, To Start Heater, To Stop Heater

Page 8

OPERATION

STORAGE

8

!WARNING

Review and understand the warnings in the Safety Information Section, pages 2 and 3. They are needed to safely operate this heater. Follow all local codes when using this heater.

To Start Heater

1.Follow all installation, ventilation and safety information.

2.Locate heater on stable and level surface. Make sure strong drafts do not blow into front or rear of heater.

3.Plug power cord of heater into a three-prong, grounded extension cord. Extension cord must be at least six feet long. Extension cord must be UL listed.

Extension Cord Size Requirement

Up to 50 feet long, use 18 AWG rated cord.

51 to 100 feet long, use 16 AWG rated cord.

101 to 200 feet long, use 14 AWG rated cord.

4.Plug extension cord into a 120 volt/60 hertz, three-hole, grounded outlet.

5.Open propane supply valve on propane tank(s) slowly. Note: If not opened slowly, excess-flow check valve on propane tank will stop gas flow. If this happens, close propane supply valve and open again slowly.

6.Turn on/off switch to the ON position. Heater will start within twenty seconds. Note: If heater does not start, turn on/off switch to the OFF position. Wait ten seconds for safety control to reset, then try again.

To Stop Heater

1.Tightly close propane supply valve on propane tank(s).

2.Wait a few seconds. Heater will burn gas left in supply hoses.

3.Turn on/off switch to the OFF position.

4.Unplug heater.

!CAUTION

Disconnect heater from propane supply tank(s).

1.Store propane tank(s) in safe manner. See Chapter 5 of Standard for Storage and Handling of Liquefied Petroleum Gases, ANSI/NFPA 58. Follow all local codes.

2.Place plastic cover caps over brass fittings on inlet connector and hose/regulator assembly.

3.Store in dry, clean, and safe place. Do not store hose/regulator assembly inside heater combustion chamber.

4.When taking heater out of storage, always check inside of heater. Insects and small animals may place foreign objects in heater. Keep inside of heater free from combustible and foreign objects.

099162

Image 8
Contents Propane Construction Heaters Contents Safety Information Rear 2 Ft Product Identification Unpacking Theory of Operation DSIPropane Supply Installation Temperature F At TankHose and Inlet Connector VentilationTo Stop Heater Operation StorageTo Start Heater How To Maintenance Preventative Maintenance ScheduleHow Often Fan Service ProceduresUpper Shell Removal Spark Plug Air Sensing SwitchIgnitor Specifications 80,000 BTU/Hr Model WiringDiagrams Wiring Diagrams 150,000 BTU/Hr ModelAccessories Technical Service Service Publications Replacement PartsParts Under Warranty Parts Not Under WarrantyWarranty and Repair Service Keep this Warranty Limited Warranty

ROPANE CONSTRUCTION HEATERS specifications

Desa Ropane Construction Heaters are renowned for their efficiency and reliability in providing heat in various construction environments. These powerful heaters are specifically designed to meet the demands of the construction industry, where maintaining a suitable temperature is crucial for worker safety and the integrity of materials.

One of the main features of Desa Ropane heaters is their robust construction. Built to withstand the rigors of job sites, these heaters are made from durable materials that can resist wear and tear. This durability ensures that the heaters can operate in harsh conditions without compromising on performance.

Desa Ropane heaters utilize advanced infrared technology to produce heat. This technology allows for efficient heating, as infrared rays directly warm people and objects, rather than the air. This makes them especially effective in large, open spaces where conventional heating methods might struggle to maintain warmth. By focusing on direct heat transfer, these heaters minimize energy waste and reduce heating costs.

Another characteristic of Desa Ropane heaters is their user-friendly design. Many models come equipped with easy-to-use controls that allow operators to adjust the temperature settings quickly. This feature is particularly beneficial for construction workers who may need to respond rapidly to changing weather conditions. Additionally, several models feature built-in safety mechanisms, such as tip-over switches and overheat protection, ensuring safe operation even in the most challenging environments.

Portability is yet another strength of Desa Ropane heaters. Many models are lightweight and fitted with wheels, making it easy to move them around job sites as needed. This flexibility is invaluable in dynamic construction environments where heating requirements may change throughout the day.

Moreover, Desa Ropane heaters operate quietly, which is an essential feature for construction sites that may need to comply with noise regulations or where workers require a more peaceful working atmosphere.

In summary, Desa Ropane Construction Heaters are crafted with durability, efficiency, and user convenience in mind. With their infrared heating technology, built-in safety features, exceptional portability, and quiet operation, they are ideal solutions for meeting the heating needs in construction settings. Their reliable performance makes them a go-to choice for contractors and construction companies looking to ensure a warm and safe working environment during cold months.