Cooling Your Room
You must select the Cool mode if you wish to adjust the:
◆ | Cooling temperature | |
◆ Fan speed when cooling | ||
|
| |
1 If necessary, press the | button. | |
Result: | ◆ The operation indicator on the indoor unit lights up. | |
| ◆ The air conditioner starts up in the mode selected | |
when the unit was last used. ◆ The indoor unit beeps.
IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
◆ Plugged in
◆Stopped
lt will start up normally after three minutes.
2 If the | is not displayed at the top of the remote control, |
|
press the | button on the remote control one or more times until it | |
appears. |
|
|
Result: | ◆ The indoor unit beeps each time you press the | button. |
| ◆ The air conditioner runs in the Cool mode. |
|
Note You can change modes at any time.
3To adjust the temperature, press the 
button one or more times until the required temperature is displayed.
Possible temperatures are between 16°C and 30°C inclusive.
Result: ◆ Each time you press the 
button: - The temperature is adjusted by 1°C
- The indoor unit beeps
◆The air conditioner starts cooling, provided that the room temperature is higher than the selected temperature.
◆If the room temperature reaches the set temperature, the air
conditioner stops cooling, but the fan is still operating.
4 Select the fan speed by pressing the | button one or more times |
until the required setting is displayed: |
|
Automatic (rotated : | ) |
Low |
|
Medium |
|
High |
|
Result: Each time you press the | button, the indoor unit |
beeps. |
|
5 To control the direction of the air flow, refer to pages 16 and 17.