Desa RM60 Fuel Filter, Ignitor, Carefully remove replacement ignitor from styrofoam packing

Page 7

OWNER’S MANUAL

SERVICE

PROCEDURES

Continued

WARNING: Never service heater while it is plugged in, op- erating, or hot. Severe burns and electrical shock can occur.

FUEL FILTER

1.Remove 4 side cover screws using 5/16" nut-driver.

2.Remove side cover.

3.Pull upper fuel line off fuel filter neck.

4.Carefully pry bushing and fuel filter out of fuel tank.

5.Wash fuel filter with clean fuel and re- place in tank.

6.Attach upper fuel line to fuel filter neck.

7.Replace side cover.

Fuel Filter

Side Cover

Upper Fuel Line

Figure 8 - Fuel Filter Removal

IGNITOR

1.Remove upper shell and fan guard (see Fan, page 6).

2.Remove fan (see Upper Shell Removal, page 6).

3.Remove 4 side cover screws with a 5/16" nut driver. Remove side cover (see Figure 8).

4.Disconnect ignitor wires (gray) from ignition control assembly (see Figure 9). Pull the ignitor wires up through the hole in the lower shell.

5.Disconnect fuel line hose and air line hose. Remove photocell from photocell bracket (see Figure 9).

6.Remove combustion chamber. Stand combustion chamber on end with nozzle adapter bracket on top (see Fig- ure 10).

7.Remove ignitor screw with a 1/4" nut driver. Carefully remove ignitor from nozzle adapter bracket.

Combustion

Nozzle

Chamber

Adapter

 

Bracket

 

Ignitor

Air

Ignitor

Line

Wires

Hose

 

Fuel

 

Line

 

Hose

 

Photocell

Ignition

Control

Bracket

Assembly

Photocell

 

Assembly

 

Side Cover

 

CAUTION:Donotbendorstrike ignitor element. Handle with care.

8.Carefully remove replacement ignitor from styrofoam packing.

9.Carefully guide ignitor into opening in nozzle adapter bracket. Do not strike ignitor element. Attach ignitor to nozzle adapter bracket with screw using a 1/4" nut driver (see Figure 10). Torque 8 to 15 in. lbs. Do not over torque.

10.Replace combustion chamber.

11.Route the ignitor wires back down through the hole in the lower shell. Connect wires to the ignition control assembly.

12.Replace side cover (see Figure 8).

13.Connect and route fuel line hose and air line hose to nozzle adapter (see Fig- ure 9).

14.Replace photocell in photocell bracket. Route wires as shown in Figure 11, page 8.

15.Replace fan (see page 6).

16.Replace fan guard and upper shell (see page 6).

Ignitor

Screw/

Washer

Assembly

Ignitor

Ignitor

Element

Nozzle

Photocell

Adapter

Bracket

Bracket

 

Figure 9 - Disconnecting Ignitor Wires from Ignition Control Assembly (see Wiring Diagrams, Figure 18 or 19 appropriately, page 10)

Combustion Chamber

Nozzle Adapter Bracket Opening

Figure 10 - Ignitor Replacement

Continued

104672

7

Image 7
Contents Portable Forced AIR Heater Fueling of heating units Safety InformationUnpacking FuelingTheory of Operation Product Identification FuelsVentilation Operation Preventative Maintenance ScheduleStoring TRANSPORTING, or Shipping Obstruction in nozzle TroubleshootingWater in fuel tank Drain and flush fuel tank with clean Dirty fuel filterFAN Service ProceduresPump Pressure Adjustment Upper Shell RemovalFuel Filter Carefully remove replacement ignitor from styrofoam packingIgnitor Pump Rotor Nozzle AssemblyParts Under Warranty SpecificationsTechnical Service Replacement PartsIgnition Control Assembly Wiring DiagramsAccessories RM60 Illustrated Parts BreakdownNumber Description QTY Parts ListLimited Warranty Warranty and Repair Service

RM60 specifications

Desa RM60 is a cutting-edge residential development that exemplifies modern living through the integration of advanced technologies, sustainable practices, and thoughtful design. Situated in a prime location, this housing community offers residents not only a home but an enriched lifestyle built on innovation and convenience.

One of the standout features of Desa RM60 is its commitment to sustainability. The developers have implemented eco-friendly design principles, utilizing renewable energy sources such as solar panels and energy-efficient appliances throughout the homes. This focus on sustainability not only helps reduce the carbon footprint of the community but also lowers utility costs for residents, making it an economically savvy choice.

The architectural design of Desa RM60 is both functional and aesthetically pleasing. Each unit is designed with an open-floor concept that maximizes space and natural light, creating a warm and inviting atmosphere. High ceilings, large windows, and contemporary finishes are just a few elements that enhance the living experience. The community layout includes ample green spaces, parks, and recreational areas, promoting a harmonious balance between urban living and nature.

In terms of technology, Desa RM60 embraces smart home features that cater to modern lifestyles. Residents can control lighting, security systems, and climate settings through mobile applications, providing a convenient and user-friendly experience. Enhanced security measures, including surveillance cameras and gated access, ensure peace of mind for families living in the community.

Transportation accessibility is another highlight of Desa RM60. The development is strategically located near major highways and public transportation options, making commuting easy for residents. Proximity to schools, shopping centers, and healthcare facilities further enhances the appeal, attracting families and professionals seeking a well-rounded community.

The community fosters a sense of belonging through organized events and activities, encouraging interaction among residents. This atmosphere of connectivity and support enhances the overall experience of living in Desa RM60, making it more than just a place to live but a vibrant community where relationships thrive.

In summary, Desa RM60 combines modern architecture, sustainable living, and innovative technology to offer a unique residential experience. Its thoughtfully designed spaces and emphasis on community make it an ideal choice for those looking to embrace a forward-thinking lifestyle.