Desa KEROSENE HIGH PRESSURE PORTABLE FORCED AIR HEATERS owner manual Fuel Lines

Page 12

SERVICE PROCEDURES

Continued

PUMP (Procedure if Pump is Binding)

1.Remove upper shell (see Upper Shell Re- moval, page 10).

2.Loosen hex screw on ﬂange clamp at rear of motor with 5/16" nut-driver (see Figure 13).

3.Turn fan with hand (see Figure 14).

4.If fan turns freely, tighten screw on ﬂange clamp.

5.If fan does not turn freely, replace pump.

6.Replace upper shell.

Hex Screw

On Flange

Clamp

Figure 13 - Location of Screw on Flange Clamp

FUEL LINES

(Procedure for Tightening Fuel Lines)

1.Remove upper shell (see Upper Shell Re- moval, page 10).

2.Use an adjustable wrench as a backup on ﬁttings.

3.Use 7/16" wrench and tighten fuel lines at solenoid valve, pump and fuel ﬁlter canister (if equipped) (see Figures 15 and 16).

Burner Head

Fuel

Line

Solenoid Valve

Figure 15 - Fuel Line at Solenoid Valve

Fuel

Pump

Fuel Lines

Figure 16 - Fuel Lines at Pump

Figure 14 - Turning Fan with Hand

www.desatech.com

110098-01F

Image 12

Contents Table of Contents Safety Information Follow all local ordinances and codes when using heaterFueling Top 4 FtProduct Identification UnpackingOperation Follow all ventilation and safety information FuelsVentilation To Start HeaterSTORING, Transporting of Shipping To Stop HeaterTo Restart Heater Unplug extension cord from outletPreventative Maintenance Schedule Troubleshooting Observed Problem Possible Cause RemedyDamaged electronic ignitor Wrong pump pressure Adjust pump pressure see Can be seen Fill with clean fuelTank Wrong fuel Remove fuel see StoringService Procedures Upper Shell RemovalFAN Blades and AIR Deflectors Spark PlugRemove pressure gauge plug from fuel pump port marked Gauge GaugeFuel Lines Remove upper shell see Upper Shell Re- moval,Fuel Filters Illustrated Parts Breakdown Models B350D, SB350D and R350AParts List NTC-4CModels B600D, SB600D and R600A NTC-4C Burner Head Assembly 350,000 and 600,000 BTU/HR Illustrated Parts Breakdown and Part ListNPF-5C Motor and Pump Assembly 350,000 and 600,000 BTU/HR Part ListSpecifications Wiring DiagramOutput Rating Btu/Hr 350,000 600,000 Fuel Maintenance Kits Technical ServiceAccessory Replacement Parts110098-01F Warranty and Repair Services Limited Warranty

KEROSENE HIGH PRESSURE PORTABLE FORCED AIR HEATERS specifications

Desa Kerosene High Pressure Portable Forced Air Heaters are engineered to deliver efficient and effective heating solutions for a variety of applications. These heaters stand out for their portability, high heating capacity, and adaptability to different environments, making them ideal for construction sites, warehouses, livestock facilities, and other outdoor settings.

One of the standout features of Desa heaters is their high-pressure design. This technology allows for rapid heating by forcing hot air into the surrounding area at a higher velocity compared to traditional heaters. This means that larger spaces can be heated more quickly and efficiently. With adjustable outlets, users can direct heat where it is needed most, further optimizing energy use and comfort.

These heaters utilize high-quality kerosene fuel, which offers a robust heating output while maintaining a clean burn. Kerosene is widely available and often more cost-effective than other heating fuels. The heaters are designed to efficiently burn kerosene, ensuring minimal emissions and environmental impact. This makes them suitable for both indoor and outdoor use when proper ventilation is provided.

Safety is a primary focus in the design of Desa high-pressure heaters. They are equipped with multiple safety features, including automatic shut-off mechanisms, which activate in the event of overheating or abnormal operation conditions. Additionally, robust construction ensures durability, allowing these heaters to withstand tough working conditions while providing reliable performance over time.

Ease of operation is another key characteristic of Desa heaters. Many models come with user-friendly controls that allow for straightforward adjustments of temperature settings and fan speeds. Portability is enhanced through built-in handles and lightweight designs, allowing users to transport the heaters with ease.

In conclusion, Desa Kerosene High Pressure Portable Forced Air Heaters offer effective heating solutions that combine high performance, safety, and convenience. With their advanced features, durability, and efficiency, they stand as a reliable choice for anyone needing substantial heat output in challenging environments. Whether for commercial, industrial, or agricultural use, these heaters provide an essential service by delivering warmth whenever and wherever it is most required.